Radiator Edger

Complete parts breakdown for US Sander Radiator / Toe Kick Edger

This Parts breakdown is for the following machines:

13 Edger 5 & 7 Pad

10 Edger 5 & 7 Pad

Related Products

Dust Shroud, 7 inch

7 inch dust shroud for DRE10 and DRE13 edgers. This is a plastic cover that fits over the nose and improves dust pickup when using 7 inch or 5 inch sandpaper. The tube on the side connects to your hose and provides much better dust pickup than the port on the back of the edger. This will fit most radiator edgers with the Makita motor. In some cases you may want it lower (if you are using backing pads) or higher (it is dragging on the floor) - simply heat it with a hair dryer and bend to where you need it...

$49.00

Item # DRE99

Needle Edger, 2 inch

Micro 2 inch picket edger for sanding small areas like stair spindles and corners. Practically eliminates scraping. Variable speed No load pad speed 9,500 RPM Great dust collection with 1.5 inch vacuum hose. Polymer carbon fiber nose. Use hook and loop for fine finishing or roloc quick change discs for super aggressive cutting. Corded power to never run low, we also have a cordless model (# ZEMNB) Adjustable non-marking urethane wheels Handle attaches to nose or side of motor for ease of use and removes for small areas 1 year limited warranty CORDLESS MAKITA VERSION ALSO AVAILABLE ZEMNB Twist lock sandpaper is USDC Hook & loop sandpaper USDH2..

$550.00

Item # ZEMN

Conversion H&L Pad 5 in. for DRE

5 inch Hook and Loop Conversion Pad for US Sander radiator/toe kick sander (DRE13 & DRE10). Includes spacers for under the wheels for the change in thickness of the pad. Bolts on with the standard paper washer and bolt...

$15.48

Item # DRE015H

10 Belt Guard SS Old Style

$15.00

Item # DRE39-10

13 Belt Guard Old Style

$15.00

Item # DRE39-13

Bottom Plate Screw 1/4-20 x 1/2

$1.00

Item # DREH3

Dust Pipe, New Style

New style plastic dust pipe. For cordless edgers, use DRE44 instead.

$12.00

Item # DRE43

Belt, 3L250*

3L Series belt. These are commonly used for fans on large sanders or to drive the pads on radiator edgers. 3/8 Wide x 7/32 thick.

$7.00

Item # 3L250

Belt, 3L310*

3L Series belt. These are commonly used for fans on large sanders or to drive the pads on radiator edgers. 3/8 Wide x 7/32 thick.

$7.00

Item # 3L310

Bearing, Ball, 6201-2RS

Sealed ball bearing. Commonly found on sanders, buffers and edgers. If you are not sure what bearing you need, see the parts diagram for your machine.

$7.00

Item # 6201

Bearing, Ball, 6203-2RS

Sealed ball bearing. Commonly found on sanders, buffers and edgers. If you are not sure what bearing you need, see the parts diagram for your machine. Now stocked in SKF brand.

$7.00

Item # 6203

10 Belt Guard SS w/Vacuum

$21.88

Item # DRE40-10

13 SS Belt Guard w/ Vacuum

$15.53

Item # DRE40-13

5 Edger Pad w/ rubber

Fits the Makita and Portercable Under Radiator Edgers. Can also be used on the Mini Stair Edger with spacers (DSEH1 and DSEH2).

$83.27

Item # DRE015

7 Edger Pad (Fiber) no nut

Use this on under radiator edgers to fit under lower objects. This will allow you to use 7 x 7/8 paper on a 5 radiator edger.

$21.87

Item # DRE017

Armature, Variable Speed

$145.41

Item # DREM01A

Baffle Plate

$5.00

Item # DREM36

Bearing Retainer 23.36

$14.00

Item # DREM25

Bearing, Ball, 608-2RS

Miniature size sealed ball bearing. Most commonly used on cone rollers for belt sanders.

$10.00

Item # 608

Bearing, Sealed*

The caster pivot bearings on Super 7 edgers. These have a teflon seal to keep dust out. Also fits the edger wheel.

$5.18

Item # CE67

Brush Cap

$3.00

Item # DREM51

Brush, set 2

Brushes for the Makita Motor on the US Sander Radiator / Toe Kick edger and stair edger. Sold as a set of 2.

$17.00

Item # DREM50

Caster Assy DRE10^

$29.00

Item # DRE05-10

Caster Assy DRE13^*

Caster with stud and wheel for Radiator Edger. Does not include swivel bearings.

$29.00

Item # DRE05

Cord Guard

$4.00

Item # DREM44

Cord w/ Plug, Makita

$33.00

Item # DREM17

Dust Pipe Old Style

Old style metal dust pipe. Note - will not fit machines with plastic dust pipe.

$32.75

Item # DRE41

Fan 68

$6.00

Item # DREM12

Field Assy~

$50.00

Item # DREM38

Gasket

$9.00

Item # DREM35

Gear Housing

$43.00

Item # DREM19

Gear Housing Cover

$37.00

Item # DREM04

Handle Cover

$15.00

Item # DREM47

Helical Gear, Variable Speed

$20.00

Item # DREM08A

Insulating Washer

$2.00

Item # DREM26

Knob, Nose

$13.03

Item # DRE20

Makita Variable Speed Motor

$389.92

Item # DRE50

Motor Housing

$45.00

Item # DREM54

Motor Plate, Aluminum

$62.05

Item # DRE14

Motor Pulley

$29.00

Item # DRE11

Motor Spacers, Makita, Setof4

$10.00

Item # DRE30

Nose Only, 10 extension~

$248.65

Item # DRE10-NOSE

Nose Only, 13 extension~

$254.28

Item # DRE13-NOSE

Pad Axle, Old Style(SpannerNut

Now obsolete. Update to new style shaft and paper washer. Use DRE02 Shaft, DRE61 Washer, DRE63 Bolt, DRE60 Wrench

$16.00

Item # DRE03

Pad Axle, Paper Bolt Style

$16.00

Item # DRE02

Paper Nut Long for 7 pad

5/8-11 thread spanner nut used on many under radiator edgers and the DSE5 Stair Edger. Use this long nut for with a pad or fiber disc, the short nut (DRE27) for normal paper.

$10.33

Item # DRE27L

Paper Screw 7 Pad (3/4)

Replacement paper bolt for US Sander radiator edgers.

$1.25

Item # DRE63

Paper Washer Bolt Style

Replacement paper washer for US Sander radiator edgers.

$9.40

Item # DRE61

Rubber Bushing Paper Wrench

$1.00

Item # DRE62

Screw, button, 5/16-18 x 0.5

$1.00

Item # XAFGD

Screw, Field

$5.00

Item # DREM37

Screw, Handle M4x18

$2.00

Item # DREM45

Screw, Motor, Makita

$2.00

Item # DRE31

Screw, socket, 10-32 x 0.5

$1.00

Item # XAQDD

Side Handle

$10.00

Item # DREM21

Sleeve

$9.00

Item # DREM06

Spanner Wrench for DSE5 & oldDRE

Wrench for the spanner nuts used on our Stair Edger(DSE5) and many of the older floor sanding radiator/toe kick edgers with Porter Cable Motors (IOB) and DRE13/DRE10 (Makita).

$8.00

Item # DREM07