5 inch Hook and Loop Conversion Pad for US Sander radiator/toe kick sander (DRE13 & DRE10). Includes spacers for under the wheels for the change in thickness of the pad. Bolts on with the standard paper washer and bolt...
$15.48
Item # DRE015H
7 inch Hook and Loop Conversion Pad for US Sander radiator/toe kick sander (DRE13 & DRE10). Bolts on with the standard paper washer and bolt. Use with DRE017 fiber disc...
$14.14
Item # DRE017H
7 inch dust shroud for DRE10 and DRE13 edgers. This is a plastic cover that fits over the nose and improves dust pickup when using 7 inch or 5 inch sandpaper. The tube on the side connects to your hose and provides much better dust pickup than the port on the back of the edger. This will fit most radiator edgers with the Makita motor. In some cases you may want it lower (if you are using backing pads) or higher (it is dragging on the floor) - simply heat it with a hair dryer and bend to where you need it...
$49.00
Item # DRE99
Fits the Makita and Portercable Under Radiator Edgers. Can also be used on the Mini Stair Edger with spacers (DSEH1 and DSEH2)...
$83.27
Item # DRE015
Use this on under radiator edgers to fit under lower objects. This will allow you to use 7 x 7/8 paper on a 5 radiator edger...
$21.87
Item # DRE017
Replacement case for the DSE5 stair edger...
$20.00
Item # DSE01
5/8-11 thread spanner nut used on many under radiator edgers and the DSE5 Stair Edger. Use this long nut for with a pad or fiber disc, the short nut (DRE27) for normal paper...
$10.33
Item # DRE27L
Replacement paper bolt for US Sander radiator edgers...
$1.25
Item # DRE63
Replacement paper washer for US Sander radiator edgers...
$9.40
Item # DRE61
5/8-11 thread spanner nut used on many under radiator edgers and the DSE5 Stair Edger. Use this short nut for normal paper, the long nut (DRE27L) if you have a pad or fiber disc...
Item # DRE27
..
$1.00
Item # DRE62
Wrench for the spanner nuts used on our Stair Edger(DSE5) and many of the older floor sanding radiator/toe kick edgers with Porter Cable Motors (IOB) and DRE13/DRE10 (Makita)...
$8.00
Item # DREM07
Replacement hex key wrench for the paper bolt on US Sander radiator edgers...
$1.50
Item # DRE60
