Replacement parts for this machine can be found here: Radiator Edger

US Sander
13 inch Radiator/Toekick Edger

NOW WITH DUST COLLECTION!!

Use your vacuum cleaner and now get dust less operation.

Use the 7 adapter and it feathers beautifully.

SPECIFICATIONS

AVAILABLE IN A 10 OR 13 INCH NOSE

5 inch rubber pad for use in small areas with 5 inch x 7/8 inch center hole paper
7 inch adapter for standard 7 inch edger paper
Available 5 inch hook and loop adapter # DRE015H

MAKITA 7.9 amp motor, with easy change brushes

VARIABLE SPEED!

Pad Speed 1670-3475 RPM

Right and Left hand positional handle on motor

Aux handle on nose with multiple positions

Teflon Tire Casters and the bearings are replaceable

Nose is machined aluminum -Does not crack like casting

Thin nose

Parts Schematic DRE

We no longer sell a case for these. If you would like a case, we recommend a Husky 26 inch tool box from Home Depot.

Specification

Specification
Case	No
Cord Length	8ft
Edger Type	Radiator/Toekick
Light	No
Pad Size	5" & 7"
Pad Speed	1760-3400
Power	7.9amp
Voltage	115
Weight	11 lbs
Specifications
Sold As	Each

Documents

The following documents are available:

Machine Manual

Wiring Diagram

Reviews (0)

13 Edger 5 & 7 Pad

Manufacturer US Sander
Product Code: DRE13
Availability: 33

$850.00

Qty

0 reviews / Write a review

Related Products

Dust Shroud, 7 inch

7 inch dust shroud for DRE10 and DRE13 edgers. This is a plastic cover that fits over the nose and improves dust pickup when using 7 inch or 5 inch sandpaper. The tube on the side connects to your hose and provides much better dust pickup than the port on the back of the edger. This will fit most radiator edgers with the Makita motor. In some cases you may want it lower (if you are using backing pads) or higher (it is dragging on the floor) - simply heat it with a hair dryer and bend to where you need it...

$49.00

Mini ToeKick 5in Edger Sander

Mini 5 inch toe kick edger for floor sanding in small areas and corners Great dust collection with 1.5 inch vacuum hose 5 inch hook and loop 8 hole soft flex pad finishes great No load pad speed 3,200 RPM 6 amp motor Aluminum nose with non-marking plastic pad cover 5 inch long nose to sand under toe kicks and baseboard heaters Motor and handle rotates independently to lock in any position Adjustable non-marking urethane wheels Handle attaches to side of motor for ease of use and removes for small areas 1 year limited warranty..

$550.00

Mini Rotating Stair Edger 5 inch

Handle/Motor and wheels rotate independently to lock in any position Makes stairs, risers and hard to reach places easy with rotating motor 5 inch hook and loop soft flex pad Fits easily on stair tread and riser Variable speed 3,700 RPM max Adjustable Urethane wheels 1.5 inch vacuum pipe for great dust pick up Removable handle attaches to side of motor..

$425.00

Conversion H&L Pad 5 in. for DRE

5 inch Hook and Loop Conversion Pad for US Sander radiator/toe kick sander (DRE13 & DRE10). Includes spacers for under the wheels for the change in thickness of the pad. Bolts on with the standard paper washer and bolt...

$15.48

Edger Bulb LED

LED bulb with ceramic base will fit in existing light sockets for a much longer service life than standard bulbs. 5 watt LED with 37 watt output 400+ lumen Very bright slightly blue colored bulb to help show scratches better. Made of ceramic and metal base with a clear plastic cover. Fits the Super 7, B-2, and Silver Line Edgers. This is much brighter than the new Clarke LED that is a 2.6w bulb. Note - For use on 120 volt edgers only. This will not work on 240 volt power. For 240V use part # E10LE..

$10.99

13in Radiator Edger Cordless

Cordless 13 inch Radiator Toekick Edger made by US Sander The first cordless Edger Made by US Sander 5 & 7 inch pads Billet Aluminum nose Vacuum dust containment port (Optional dust shroud available - DRE99) Makita Brushless Motor delivers 1,090 in.lbs. of Max Torque Electronic Brushless motor optimizes battery life for up to 50% more run time No carbon brushes, enabling it to run cooler and more efficiently for longer life Extreme Protection Technology (XPT�) engineered to provide increased dust resistance Long running 5ah Batteries charge in 45min or less High capacity 5.0 AH batteries allow you to sand for 20-25+ minutes 1 year warranty Use these long lasting 5ah batteries with your other Makita LXT tools Includes: Two 18V LXT� Lithium-Ion 5.0Ah Battery 18V Lithium-Ion Rapid Optimum Charger Edger with 5 pad 7 backer pad (DRE017) For tool only (no batteries or charger), order DRE13BT..

$970.00

SL7 Edger w/wheels~

The Silver-Line SL-7 a leader in floor edgers for one reason, it works! Designed and engineered to stand up to the toughest customer, the SL-7 delivers excellent results. It's built to give tip performance on the toughest jobs. The Powerful motor delivers 3600 RPM for the fast, smooth cutting you want. The oversized vacuum fan and chamber work together to achieve superior dust pick up that will make your customers very happy. The unit is manufactured from tough aluminum alloys fro extremely rugged use and is highly polished so it is easy to clean and neat in appearance for years. The conveniently place light will help brighten dark corners and closets. Fast moving parts are electronically balanced for vibration free operation. The entire machine is perfectly balanced to handle smoothly and maneuver well with easy grip handles. This edger, designed and manufactured in the USA, will give your company years of extremely low maintenance service. All parts are available quickly and..

$2,499.00

Write a review