Pacific Searay HD

Complete parts breakdown for Pacific Searay HD
This Parts breakdown is for the following machines:

Ceno Extreme Buffer

Pacific Searay HD Buffer

Related Products

Stain Carpet Pad 16 in.

16 in. Carpet Pad for use with your Floor Sanding Buffer. All pads are vacuumed and heat singed on the edge. If you are driving this carpet with a maintenance pad and it slips out you may want to use a spray glue to stick the two together. The spray glue can easily be peeled apart when finished. With a loose pad on a flat surface, pour 6 oz of stain into the center, spirally out from center. quickly place carpet side of the pad on floor and set buffer on top and start buffing immediately. Note: For use on the Spin Coater, order part number B10 (pad with center hole)..

$5.60

Item # B09

LED Light Kit, Buffer US

This light is intended to bolt to the top cover of buffers. 20 watt draw gives 120 watt equivalent 1600 lumens Bracket comes with hardware to mount to the three existing screws on the top of the buffer motor or hardware and spacer to drill one 1/4 inch hole on the buffer motor top shroud and mount it with the included knob and spacer. Note: This light does not run on 240 volt power, for 240 volt buffers use B27 instead. Includes: LED Light, 3-way power splitter, spacer block & mounting hardware. In order to use on the ZBUS Buffers, you must change the plugs on the buffer motor (6266 & 6269)..

$75.00

Item # B26

Skirt Kit, 16-17in w/ Vac Assy^

Convert your 16-17 inch buffer to a DCS Buffer. Full kit with everything you need. Heavy Duty skirt Sewn to brush material. Kit includes: Skirt (B25), fitting to connect to buffer (B22), hose (VH01) and mount to clamp on handle (B21). Skirt clamps around housing of buffer with a worm drive clamp...

$163.51

Item # B25A

Start Switch

Electronic start switch used on EZ8 sanders and some buffers. This switch controls the start capacitors.

$110.00

Item # EZ70

Switch, Replacement kit

Switch replacement kit for old Ceno Extreme buffer and Searay buffer used with the UFO.

$70.00

Item # BC08

Plug, M, 125v 15a straight*

NEMA 5-15 15 amp 125 volt 3-prong grounding male plug. This is the standard household plug. Eaton Cooper Arrow Hart Brand

$14.08

Item # 6266

Skirt 15-17in Buffer*

Replacement Buffer Dust Skirt. Heavy Duty skirt Sewn to brush material. Buffer dust skirt for 15-17 inch buffers. Clamps around housing of buffer with a worm drive clamp. Includes clamp.

$111.90

Item # B25

1-1/2 thin connector nut

Replacement nut for B22 fitting. Thin nut for low profile use under the buffer frame.

$3.00

Item # B23

Baffle, Dust Collection

$144.16

Item # BC36

Bumper (BC44)

$108.62

Item # BC34

Capacitor Box

$193.44

Item # BC30

Capacitor Box Cover

$20.85

Item # BC31

Capacitor, Run, 25mfd

$22.00

Item # BA56

Capacitor, Start, 460-552mfd

$15.96

Item # BA63

Cord Hook

$93.82

Item # BC17

Fan Cover w/cap

$174.24

Item # BC27

Fitting, 1.5 hose

Buffer frame dust collection fitting / adapter barb. This fitting is intended to go in a 2 hole drilled in the buffer shroud/frame. 1-1/2 vacuum hose fitting. Comes with 2 nuts.

$8.00

Item # B22

Gearbox, Ceno 11:1~

$630.00

Item # BC13

Handle Arm

$33.38

Item # BC18

Handle Clamp

$40.96

Item # BC19

Handle Grip

$12.82

Item # BC04

Handle Nipple

$10.54

Item # BC01

Handle Tube~

$204.12

Item # BC38

Handle Yoke

$113.12

Item # BC21

Interlock

$50.38

Item # BC05

Knob, Handle Adjusting

$30.00

Item # BC14

Lever, Switch, Left

$25.90

Item # BC10

Lever, Switch, Right

$25.90

Item # BC09

Nut, hex, 1/2-13

$1.00

Item # XEAJ

Nut, hex, 3/8-24

$1.00

Item # XEJH

Nut, nylock, 10-32

$2.00

Item # XEKD

Rod, Handle Yoke

$21.74

Item # BC22

Screw, carraige, 5/16-18 x 2.5

$1.00

Item # XAKGM

Screw, flat, 10-32 x 0.75

$1.00

Item # XAODF

Screw, flat, 10-32 x 1.75

$1.00

Item # XAODJ

Screw, hex, 1/4-20 x 1

$1.00

Item # XAAFG

Screw, pan, 1/4-20 x 0.5

$1.00

Item # XABFD

Screw, pan, 10-32 x 0.375

$1.00

Item # XANDC

Screw, set, 1/4-20 x 0.375

$1.00

Item # XAHFC

Screw, set, 10-32 x 0.375

$1.00

Item # XATDC

Switch Box Handle Assbly

$355.73

Item # BC03

Washer, split lock, 1/4

$1.00

Item # XODF

Washer, uss, 1/4

$1.00

Item # XOBF

Washer, uss, 5/16

$1.00

Item # XOBG

Washer, wave, 1/2

$1.00

Item # XOFJ

Wheel Narrow ea

$54.82

Item # BC24

Wheel, Ceno Extreme wide

Wide wheel for Ceno Extreme buffers. Wheel is 5 x 2

$47.10

Item # BC25

The following documents are also available for this machine:

Machine Manual

Wiring Diagram