All

Tension Roller Bracket

..

$187.22

Item # GAL243

Tension Roller Only

Replacement roller only for a Galaxy 12 machine. For the roller with shaft & bearings, order GAL347C. These rollers have a crown in the middle for proper tracking. Roller measures about 1.85" (47mm) in the center, 1.81" (46mm) at both ends...

$256.62

Item # GAL347

Tension Roller Only Galaxy

Upper Tension Roller tube for Galaxy Floor Sander (2000, Omega, BD12, B12). Roller only without bearings. Reuse your shaft and install two new 6202 Bearing...

$222.83

Item # GAL247

Tension Roller Side & Lower A*

Galaxy upper roller side plate with lower arm and all hardware for the lower assembly. This is the new aluminum style plate and arm. This is the only style available now (the cast iron side plate is obsolete but we can weld the old style plates and repair). You may have to drill out the adjuster bolt hole to make the new style plate fit the older machines...

$663.67

Item # GAL229C

Tension Spring

..

$12.00

Item # CS19

Tension Spring w/HS136 Screw

Drum pressure tension spring for the Hummel Includes the tension adjuster bolt and nuts When you change this you will have to set the machine back up the factory drum pressure. Setting bolt back to the same height will get it close but it may still be off. Too much pressure could overheat the motor. If you are getting reduced drum pressure or are getting waves you may want to change this. If you are getting waves also purchase the HS1110 bushings...

$30.46

Item # HS140

Tensioner Shaft NT8

..

$286.26

Item # KTN26

Tensioner~

..

$481.70

Item # LT956

Terminal Block

..

$7.00

Item # VUT06

Terminal Block 1/4

..

$7.04

Item # CP89

Threaded Pin M6x8

..

$1.38

Item # TS141

Threaded Pin M10x12

..

$1.00

Item # TS43

Threaded rod, 1/2-13 x 36

..

$10.00

Item # XAJJZ

Threaded rod, 1/4-20 x 36

..

$4.00

Item # XAJFZ

Threaded rod, 3/8-16 x 36

..

$6.00

Item # XAJHZ

Threaded rod, 5/16-18 x 36

..

$5.00

Item # XAJGZ

Threaded Stud

..

$21.24

Item # TS114

Throttle Arm

..

$29.89

Item # MR13

Throttle Cable Assembly Ryder

..

$183.75

Item # MR50

Throttle Pedal

..

$116.17

Item # MR14

Throttle Pedal Pivot Rod

..

$71.26

Item # MR15

Thumb Screw

..

$7.37

Item # CSE26

Tire & Hub Assy

..

$96.31

Item # CL97

Tire Side Wheel Old Style Hummel

This is the old style Hummel side wheel for machines 2001 and older that have not been upgraded to new style wheels. Fits older style Hummel with the screw on cover over the wheel. Plastic Teflon Type Material OEM sizes Flat bottom wheel so it does not dent softer floors..

$47.70

Item # HS01

Tire, Libra

Fits Libra, Mignon. Same wheel is used for both sides and rear. Measures 1-3/4 inch inside, 2-1/2 inch outside and about 11/16 inch wide. These are a stretch fit on the hub, so the hub is a bit larger than the wheel inside diameter. We recommend warming the tire in hot water to soften it for easier installation...

$31.32

Item # KT02

Tire, Rear Old Style Hummel

This is the old style Hummel rear wheel. Fits older style Hummel with the double yoke rear caster 2001 and older Plastic Teflon Type Material OEM size Flat bottom wheel so it does not dent softer floors..

$54.94

Item # HS02

Tire, Rear, OEM

..

$66.60

Item # TS02A

Tire, Side Wheel

..

$58.35

Item # TS01

Tire, Side Wheel OEM

..

$93.04

Item # TS01A

Tool Bag, Complete

..

$167.56

Item # HS226

All

Refine Search