16 in. Carpet Pad for use with your Floor Sanding Buffer. All pads are vacuumed and heat singed on the edge. If you are driving this carpet with a maintenance pad and it slips out you may want to use a spray glue to stick the two together. The spray glue can easily be peeled apart when finished. With a loose pad on a flat surface, pour 6 oz of stain into the center, spirally out from center. quickly place carpet side of the pad on floor and set buffer on top and start buffing immediately. Note: For use on the Spin Coater, order part number B10 (pad with center hole)..
$5.60
Item # B09
This light is intended to bolt to the top cover of buffers. 20 watt draw gives 120 watt equivalent 1600 lumens Bracket comes with hardware to mount to the three existing screws on the top of the buffer motor or hardware and spacer to drill one 1/4 inch hole on the buffer motor top shroud and mount it with the included knob and spacer. Note: This light does not run on 240 volt power, for 240 volt buffers use B27 instead. Includes: LED Light, 3-way power splitter, spacer block & mounting hardware. In order to use on the ZBUS Buffers, you must change the plugs on the buffer motor (6266 & 6269)..
$75.00
Item # B26
Convert your 16-17 inch buffer to a DCS Buffer. Full kit with everything you need. Heavy Duty skirt Sewn to brush material. Kit includes: Skirt (B25), fitting to connect to buffer (B22), hose (VH01) and mount to clamp on handle (B21). Skirt clamps around housing of buffer with a worm drive clamp...
$163.51
Item # B25A
Sealed ball bearing. Commonly found on sanders, buffers and edgers. If you are not sure what bearing you need, see the parts diagram for your machine.
$7.00
Item # 6002
$1.00
Item # XMBI
$25.00
Item # BU17
Gearbox to armature coupling If not in stock this is the same as Part Number B01
$30.00
Item # BU06
Heavy duty updated handle yoke. This one is made from steel instead of aluminum. Install Instructions
$66.00
Item # BU21
$17.61
Item # BU14
Item # XPAK
Item # XPEH
Item # XBKIS
Item # XBCGJ
Item # XBCGS
Item # XBBHH
Item # XBEHN
$21.90
Item # BU56
$24.00
Item # BU63
Start switch inside motor of ZBUS and ZBUSHD
$20.00
Item # BU66
Trigger Switch for ZBUS and ZBUSHD
Item # BU08
Left trigger lever for ZBUS and ZBUSHD
Item # BU10
Item # BU09
Item # XOBF
$17.57
Item # BU23
Here are a few tips on using them.
