KT (Kunzle and Tasin) Sanders Taurus & NT8 Parts Schematic
Also parts for the Bona Belt HD
Click diagram for more information
$157.38
Item # TS94
$6.92
Item # TS81A
Spring, knob and rod assembly (TS140, TS135 and the rod for TS140)
$141.16
Item # TS139
$1.00
Item # XNCR
Item # XOCG
NEMA L6-30 30 amp 250 volt grounding twist-lock male flanged inlet. This is the standard size used on KT & Galaxy machines. Eaton Cooper Arrow Hart Brand
$37.60
Item # 6345
3L Series belt. These are commonly used for fans on large sanders or to drive the pads on radiator edgers. 3/8 Wide x 7/32 thick.
$8.00
Item # 3L280
Sealed ball bearing. Commonly found on sanders, buffers and edgers. If you are not sure what bearing you need, see the parts diagram for your machine.
$7.00
Item # 6001
$10.00
Item # 6004
Item # 6005
BX Belts are a cogged version of the B series belt. The ribs make the belt more flexible, making it run smoother. The one downside to these belts is that they tend to wear aluminum pulleys faster. 21/32 wide x 13/32 thick cogged.
$18.50
Item # BX37
Item # 6201
Item # 6202
$12.00
Item # 6205
$14.00
Item # 6206
Can use CS17 as a substitute.
$32.94
Item # TS100
$9.79
Item # TS149
$11.62
Item # TS151
Miniature size sealed ball bearing. Most commonly used on cone rollers for belt sanders.
$33.00
Item # 609
These self aligning, or floating bearings are used for the top roller on the KT NT8, Bona Prosand, and Wolff Cobra sanders.
$59.00
Item # KTN8
$5.35
Item # KTN58
$345.36
Item # KTN55
$242.98
Item # TS55
Item # TS58
$1.12
Item # TS49
$9.40
Item # TS159
$6.63
Item # TS197
$75.57
Item # TS37
$5.94
Item # TS276
$85.53
Item # TS116
$9.20
Item # TS134
Item # TS283
$49.51
Item # TS22
$4.50
Item # TS129
$8.34
Item # TS192
$39.66
Item # TS192L
$12.99
Item # TS82
$9.64
Item # TS256
$32.28
Item # TS153
$23.31
Item # TS205
$89.04
Item # TS30
$8.56
Item # KTN29
$106.26
Item # KTN30
$336.37
Item # TS271A
$470.00
Item # TS271
$79.03
Item # TS08
$111.72
Item # WS08
Item # KTN23
$10.49
Item # TS26
Item # XMBI
Item # XMBK
$66.15
Item # WS20
$52.92
Item # WS21
$135.45
Item # TS278
$18.80
Item # TS81
$10.16
Item # TS148
$15.94
Item # KTN33
$168.68
Item # TS48
$721.24
Item # TS161
$111.90
Item # TS80
$15.76
Item # TS86
$71.55
Item # TS154
$50.47
Item # TS89
$10.20
Item # TS88
$80.47
Item # TS20
$74.39
Item # TS21
$99.76
Item # TS272
$116.36
Item # TS279
Item # KTN272
Item # KTN279
$798.66
Item # TS169
$169.98
Item # TS64
$51.97
Item # TS165
$55.55
Item # TS71
$95.72
Item # TS220
$57.73
Item # TS87
$181.32
Item # TS83
$7.50
Item # TS144
$1,991.48
Item # TS23
$1.52
Item # TS75
$10.89
Item # TS78
$662.69
Item # TS90
Item # TS77
$2.00
Item # XMCU
Item # XNCT
$89.32
Item # TS177
$47.98
Item # TS217
$37.92
Item # TS218
This is a square plate with 4 bolts to replace the old European plug, and a flanged inlet will attach to it. We recommend using this with a 6345 or 6215 flanged inlet. Screws are included.
$25.00
Item # TS203
$32.35
Item # TS135
Item # TS28
$24.76
Item # TS195
Item # XLBHL
Item # XLBHO
Item # XFAK
Item # XFAF
Item # XFAI
Item # XJABG
Item # XJAEN
Item # XJAFL
Item # XPAK
Item # XPAH
Item # XPAI
Item # XPDF
Item # XPDG
Item # XPDI
Item # XBGIN
Item # XBCED
Item # XBCFO
Item # XBCGJ
Item # XBCHL
Item # XBAFO
Item # XBAHJ
Item # XBAHS
Item # XBAIL
Item # XBAIN
$20.00
Item # XBAIY
Item # XBBFF
Item # XBBFD
Item # XBBGF
Item # XBBGG
Item # XBHJL
Item # XBHFE
Item # XBHHE
Item # XBEJO
Item # XBEJQ
Item # XBEFF
Item # XBEGL
Item # XBEGN
Item # XBEHF
Item # XBEHM
Item # XBEHO
Item # XBEIL
Item # XBEIN
Item # XBEIO
Item # XBEIP
$42.60
Item # TS193
$14.45
Item # TS194
$993.02
Item # KTN52
$521.86
Item # TS52
$2.46
Item # TS33
$2.48
Item # TS69
$4.67
Item # TS117
$5.08
Item # KTN46
$3.92
Item # TS137
$3.71
Item # TS38
$6.00
Item # TS46
$10.54
Item # TS267
$67.54
Item # TS214
$128.73
Item # TS160
$31.14
Item # TS85
$34.50
Item # TS02
Recovered 8 KT Taurus - NT8 Kunzle and Tasin 8 drum. This drum has been tapered (football shaped) to assist in tracking and reduction of edge cutting. Precision balanced to similar specs as all our belt sander drums.
$310.00
Item # RTS8
$13.00
Item # KTN4
$26.00
Item # TS04
$5.54
Item # TS138
$5.12
Item # TS62
$26.96
Item # TS102
$16.56
Item # KTN435
$7.87
Item # TS73
$7.38
Item # TS166
Item # KTN434
$1.32
Item # TS282
$7.96
Item # TS124
$7.24
Item # TS123
$150.34
Item # TS122
$274.00
Item # KTN430
$16.37
Item # KTN9
$3.00
Item # TS95
Item # TS164
$7.21
Item # TS157
Item # TS113
$10.53
Item # TS39
$1.45
Item # TS196
Item # TS128
$8.40
Item # TS140
$11.70
Item # TS40
$4.95
Item # TS121
$146.38
Item # TS202
$11.00
Item # TS136
$164.60
Item # KTN26
$15.02
Item # TS114
$58.35
Item # TS01
This is the entire top roller assembly to fit the KT NT8. Please note that KT makes 2 different belt sanders - the Taurus and the NT8. The top roller on the NT8 is smaller (outer roller measures approximately 2-3/8 inch). The roller for the Taurus is part number TS107. You will need a 36mm thin wrench, like this one: https://www.toolsid.com/v8-tools/35-mm-x-36-mm-super-thin-wrench-mpn-813536.html For removal, install and adjustment instructions, check out our YouTube video: https://www.youtube.com/playlist?list=PL3_0KULLIuJrLNuAY_VsAb58l-Pb2zM6u
$1,200.00
Item # KTN800
This is the entire top roller assembly to fit the KT Taurus. Please note that KT makes 2 different belt sanders - the Taurus and the NT8. The top roller on the Taurus is larger (outer roller measures approximately 2-7/8 inch). The roller for the NT8 is part number KTN800. You will need a 36mm thin wrench, like this one: https://www.amazon.com/Lisle-43390-36mm-Wrench/dp/B002YKJMCG For removal, install and adjustment instructions, check out our YouTube videos: https://www.youtube.com/playlist?list=PL3_0KULLIuJrLNuAY_VsAb58l-Pb2zM6u
$815.28
Item # TS107
This self aligning, or floating bearing is used in the top roller on KT Taurus belt sanders.
$100.00
Item # TS92
$5.77
Item # TS109
Item # TS156
$1.08
Item # TS215
$186.88
Item # TS98
$184.99
Item # TS99
$9.81
Item # TS145
$29.93
Item # TS150
$87.66
Item # TS133
Here are a few tips on using them.