Super Hummel 12

Lagler Super Hummel 12 Sander Parts Schematic Click diagram for more information
This Parts breakdown is for the following machines:

Super Hummel12 Belt~

Super Hummel12 Sander 3 Phase

Related Products

80g Belt Blue Zir 77/8x29.5

7-7/8 x 29-1/2 blue zirconium sanding belts. These are our economy sanding belts. They are zirconium for durability, yet priced very affordable. Zirconia grain X weight backing S seam 10 per box Known as our blue belts..

$4.60

Item # USBB80

Hummel Machine 8 W/light

Call for BEST PRICE! This comes with the new light and feather handle. Designed and built by Lagler in Germany, this machine has several features its competitors lack. Its light weight and easily removable handle and motor make carrying it a breeze. The unique crowned drum eliminates most of the chatter and edge gouging problems. This is our preferred machine to sell because they always work as expected. The HUMMEL belt sanding machine is the best-known floor sanding machine in the world, with thousands of models in use across the globe. Mature, long-life technology for perfect sanding quality and enormous machine power have made it the undisputed number one system for parquet floor finishing for decades. The combination of an aggressive sanding drum, three-stage drum pressure regulation and belt tensioning device with integrated automatically regulated belt guidance guarantees quick work and optimum sanding quality. If a more aggressive machine is required we would recom..

$10,802.00

Item # ZSHS001

Dolly, Hummel^

These travel dollys have 5 inch diameter x 2 inch wide grey non marking rubber wheels to roll smoothly even on rough terrain. They have a spring pin to attach them firmly yet allow quick removal. No machine modifications. Slides on and of in seconds, so it is not in the way while sanding. Fits 8 Hummel belt sanders. ***Green Powder Coated Frame last longs and scratches less*** Now updated to fit newer machines! Also available for the Galaxy, KT, and Bona HD..

$250.00

Item # HSDOLLY

Belt Super Hummel Fan

$54.43

Item # HS806

Compression Spring

Spring for the tracking adjuster on the Hummel sander upper roller

$30.47

Item # HS857

Contactor, Super Hummel

Contactor for Super Hummel 220 volt. Does not fit 3 phase machines.

$543.03

Item # HS823

Control Rod, Lower 12

Upper control rod for the Super Hummel

$61.67

Item # HS842

Control Rod, Upper 12

Upper control rod for the Super Hummel

$109.65

Item # HS828

Drum Shaft, Super Hummel

$473.46

Item # HS932

Dust Shoe, Super Hummel 12

$115.21

Item # HS858

Fan Assembly, Super Hummel 12

$735.99

Item # HS811

Key

Key for drum on Super Hummel 12.

$5.57

Item # HS884

Lifting fixture w/ Wheel

Upper control rod for the Super Hummel

$418.41

Item # HS855

Linkage, Top Roller

$161.78

Item # HS834

Metric screw, hex, 6 x 14

$1.00

Item # XBAHH

Nut, Hex LH Drum Super Hummel

$47.01

Item # HS159S

Pin for Top Roller

$16.00

Item # HS881

Spacer

Spacer for drum shaft bearings

$15.00

Item # HS885

Spacer

Spacer for drum shaft bearings

$6.00

Item # HS886

Spacer Ring

Spacer between bearings and drum

$60.73

Item # HS887

Tilting fixture

Left side wheel bracket with wheel, super hummel

$186.19

Item # HS880

Tilting fixture w/ Wheel

Left side wheel bracket with wheel, super hummel

$457.44

Item # HS833

Bearing, Ball, 6007-2RS

Sealed ball bearing. Commonly found on sanders, buffers and edgers. If you are not sure what bearing you need, see the parts diagram for your machine.

$16.00

Item # 6007

Bearing, Ball, 6205-2RS

Sealed ball bearing. Commonly found on sanders, buffers and edgers. If you are not sure what bearing you need, see the parts diagram for your machine.

$12.00

Item # 6205

Bearing, Ball, 6308-2RS

Sealed ball bearing. Commonly found on sanders, buffers and edgers. If you are not sure what bearing you need, see the parts diagram for your machine.

$33.00

Item # 6308

12 Hummel Drum~

$1,295.62

Item # HS802

12 Top Roller Assy, Com.~

$1,893.63

Item # HS803

12 Top Roller Assy, OEM

$498.50

Item # HS814

Belt Super Hummel Drum

$102.91

Item # HS805

Belt Tensioner, Complete OEM

Fan belt tension pulley with bracket for Hummel

$367.44

Item # HS064

Cable Support, Complete

Cord holder for Hummel. Includes O-ring. Note - replacement O-ring is part # UE31

$62.14

Item # HS082

Capacitor, Run, 40mfd

OEM Running Capacitor for the Lagler Hummel and Elf sanders. For a lower cost alternative, consider HS205A instead.

$258.96

Item # HS205

Capacitor, Start, 130mfd

OEM 130mfd Starting Capacitor for the Lagler Hummel and Elf sanders. Some very old machines may have a 60mfd capacitor instead; see HS153-60. For a lower cost alternative on Hummel sanders, consider HS153A instead (HS153A cannot be used on edgers).

$339.54

Item # HS153

Collar Nut

Assembly that holds the bottom of side drum door on the Hummel

$22.62

Item # HS051

Collar Rubber NS Boot

$113.75

Item # HS815

Compression Spring

Spring for the tracking adjuster on the Hummel sander upper roller

$22.73

Item # HS123

Cone Roller/CL31^*

Edge guide/cone roller for the Hummel Sander. Assembled with bearings, threaded stud, and nut. Replacement bearings for this roller is # 626 OEM roller available under part # HS108

$65.00

Item # HS21

Edge Roller Assy

Wall guide / edger roller for Hummel Sander The wheel only is available to replace. See part number HS042.

$153.01

Item # HS102

Eye Bolt

Eye bolt for attaching an operator belt to the Hummel machine. The threads are 8mm.

$25.26

Item # HS256

Fan Motor Cooling, 12

Motor cooling fan for Super Hummel 12 inch.

$116.42

Item # HS822

Handle Replacement, Phenolic

Replacement Handle for left or right on newest style Hummel bullet style handles Does not fit the old style handles from the 90s

$41.18

Item # HS078

Hex Head Socket Screw

$1.26

Item # HS126

Hummel Wheel New Style Flat

Made out of plastic Teflon type material. New style wheel for machines made after the 2000s Replaceable bearing These wheels have a flat bottom and do not mark soft floors as easily. This is our customer requested design. for original pointed type wheel use part # HS149

$60.00

Item # HS149W

Key (Long)

$5.57

Item # HS163

Kill Switch w/ Red Button

$105.72

Item # HS836

Knob, Ball

Ball knob push on style for Hummel feather handle

$22.02

Item # HS083

Lever, Drum control

Drum lever or feather handle for Hummel If there is play in your handle you should replace this item or install a new bushing from US Sander # HS080A This does not include the ball knob

$105.89

Item # HS080

Met. Nut, hex, 8

$1.00

Item # XFAI

Met. Nut, nylock, 8

$1.00

Item # XFBI

Met. Washer, fender, 8

$4.00

Item # XPCI

Met. Washer, sae, 8

$1.00

Item # XPAI

Met. Washer, tooth lock, 8

$1.00

Item # XPEI

Metric screw, hex, 8 x 50

$1.00

Item # XBAIS

Metric screw, low socket, 8 x 12

$2.00

Item # XBYIG

Metric screw, socket, 8 x 35

$1.00

Item # XBEIP

Motor Nut

$43.82

Item # HS194

Motor Pulley

$274.48

Item # HS214

Nut, Hex RH

$42.98

Item # HS158

Plastic Bushing

Plastic chassis bushing for the wheel axle on the Hummel Sander. If your Hummel is creating waves this is one of the items you should replace to make sure your machine is moving freely. You also need to make sure the wheel axle/arm is not worn, dirty, or galled and moves freely with the wheel truck removed. Replace the axle/arm if there are any of the mentioned problems with a new axle/arm # HS151.

$21.80

Item # HS1110

Pulley Drum, V belt

$265.52

Item # HS160

PVC Tube

PVC cover for the rear safety guard/carry handle on the Hummel

$15.97

Item # HS038

Rear Wheel Complete w/Yoke

Rear wheel with yoke for Hummel This is the new style wheel with the new style single yoke caster.

$352.89

Item # HS091

Rear Wheel, New Style OEM

Rear Caster wheel with bearing for Hummel Fit the caster yoke that only has one yoke OEM This is the tapered plastic wheel. If you want a flat wheel for soft floors see item # HS02N

$139.20

Item # HS099NS

Recovery of Hummel 12 Drum

We recommend buying a new precision drum from Lagler. We can recover yours with black rubber Grind (football shape) and electronically balance. Allow extra time for recovery.

$455.00

Item # RHS12

Please call to order this item.

Safety Guard, Complete

Also called the rear carry handle for the Hummel

$71.09

Item # HS037

Side Door, Super Hummel 12

$102.26

Item # HS810

Switch, Rotary Original

Switch for Hummel Floor Sander by Lagler.

$458.24

Item # HS202

Tension Spring w/HS136 Screw

Drum pressure tension spring for the Hummel Includes the tension adjuster bolt and nuts When you change this you will have to set the machine back up the factory drum pressure. Setting bolt back to the same height will get it close but it may still be off. Too much pressure could overheat the motor. If you are getting reduced drum pressure or are getting waves you may want to change this. If you are getting waves also purchase the HS1110 bushings.

$30.46

Item # HS140

Yoke Housing

$220.46

Item # HS271

The following documents are also available for this machine:

Machine Manual

Wiring Diagram (3 phase)

Wiring Diagram (single phase)