Sealed ball bearing. Commonly found on sanders, buffers and edgers. If you are not sure what bearing you need, see the parts diagram for your machine.
$7.00
Item # 6002
Item # 6202
$11.00
Item # 6302
On-Off toggle switches for Floor Sanding edgers. These are a 2-pole switch. Medium duty 20 amp @110v This is the edger switch we recommend for most Clarke Edgers S7 (Super 7R) & B2
$13.76
Item # K508A
Standard heavy duty bulb for 110v Clarke type edgers. 25 watt See our part number E13L for our replacement LED bulb that will not not burn out and is a direct replacement without any modifications. We also have part number E26 that is a brighter pod LED light upgrade kit.
$1.75
Item # E13
$14.95
Item # CSE35
$252.75
Item # CSE36
$205.70
Item # CSE20
Adhesive backed rubber. For the same thing without adhesive, see DRE015R. We recommend the pad without adhesive instead (DRE015). Contact cement makes a much stronger bond than the adhesive on the rubber.
$21.92
Item # CSE19
$358.60
Item # CSE41
This pad must be glued on with contact cement (you can get it at Home Depot https://www.homedepot.com/p/DAP-Weldwood-3-fl-oz-Original-Contact-Cement-00107/100195615
$37.64
Item # CSE42
$798.93
Item # CSE07
$1,866.85
Item # CSE08
$7.37
Item # CE43
$14.72
Item # CE52
$61.08
Item # CSE15
$37.68
Item # CSE33
Drive Belt for Clarke Super E extension edger with the 7 in pad and 8 in nose
$71.44
Item # CSE27
$248.49
Item # CE38
$38.53
Item # CE32
Clarke Super 7 Edger New style brush holder assembly This is the brush holder assembly that has been used since the late 90s. It also can be used as a replacement for the older style four brush holder on the super 7. You will just need to put push connect ends on the wires. This does not include springs (needed 4pcs - CE68) and also requires the brushes with the wires attached (#CE57)
$53.48
Item # CE38N
$22.00
Item # CE53
New style brush spring for Clarke Super 7 Edger Fits CE38N brush block with CE57 brush set Do not completely unroll the spring or it will be ruined.
$6.58
Item # CE68
$12.86
Item # CE31
Replacement brushes for Super 7 edgers. Set of 4 brushes without wires (for brushes with wires, see part #CE57). We recommend replacing brushes when they are worn down to 2/3 the normal length. Running brushes shorter than this can cause the armature to wear faster. Carbons measure 3/16 x 15/16, 7/8 long.
$18.12
Item # CE09
Replacement brush set for Clarke Super 7 / 7R edgers. Set of 4 brushes with wires (for brushes without wires, see part #CE09). We recommend replacing brushes when they are worn down to 2/3 the normal length. Running brushes shorter than this can cause the armature to wear faster. Carbons measure 3/16 x 15/16, 7/8 long. Made in USA by the original Clarke manufacturer. Replaces OEM part number 40818A
$16.48
Item # CE57
Set of 2 replacement brushes for Super 7 2-brush edgers. Note that most Super 7 edgers are 4-brush, make sure that you confirm which you need before ordering. We recommend replacing brushes when they are worn down to 2/3 the normal length. Running brushes shorter than this can cause the armature to wear faster. Carbons measure 5/16 x 5/8, 1 inch long.
$21.24
Item # CE04
This includes a threaded insert, install tool and a new caster. After the retrofit, CE98 replacement casters can be used.
$34.89
Item # CSE11
$10.50
Item # CE25
$11.90
Item # CE24
$33.88
Item # CE30N
$341.40
Item # CSE14
$616.84
Item # CSE30
$240.90
Item # CSE45
$102.59
Item # CSE32
$319.85
Item # CSE25
$56.65
Item # CE26
$141.63
Item # CE27
$262.79
Item # CE39
$4.37
Item # CE34
$4.78
Item # CE23
$39.02
Item # CSE16
$22.88
Item # CSE34
$21.12
Item # CSE28
$24.60
Item # CSE46
$73.37
Item # CSE06
$25.41
Item # CE28
Tab load spring. For 6202 bearing.
$2.25
Item # SPR1128
$145.60
Item # CSE05
$162.43
Item # CSE13
$1.00
Item # XEDJ
$7.70
Item # CE66
$433.71
Item # CSE39
$97.02
Item # CSE10
$13.00
Item # CSE29
$35.53
Item # CSE21
$29.00
Item # CSE18
$44.24
Item # CSE44
$14.85
Item # CSE43
$3.00
Item # CSE17
$2.00
Item # CE69
Pad Shaft for Clarke Super E Edger with 5 inch pad and 8 inch nose
$50.00
Item # CSE37
Pad Shaft for Clarke Super E Edger with 5 inch pad and 13 inch nose
$75.00
Item # CSE23
Pad Shaft for Clarke Super E Edger with 7 inch pad and 8 inch nose and also with 3 inch pad and 8 inch
$80.00
Item # CSE31
Replacement inserts also available - see CE56 and AE62.
Item # CE55
$8.00
Item # CSE24
Item # CSE26
Adapter kit for connecting your Super 7, Essex Silver Line SL7, or KT Blizzard edger to a 1.5 inch vacuum hose. Designed for the old style (fixed) pipe. Also includes coupling to connect two 1.5 inch hoses for more length.
$19.00
Item # CE72
$17.93
Item # CE29
Here are a few tips on using them.
