Sander 16

Complete parts breakdown for Sander 16
This Parts breakdown is for the following machines:

Clarke/American Sander 16

Related Products

Stain Carpet Pad 16 in.

16 in. Carpet Pad for use with your Floor Sanding Buffer. All pads are vacuumed and heat singed on the edge. If you are driving this carpet with a maintenance pad and it slips out you may want to use a spray glue to stick the two together. The spray glue can easily be peeled apart when finished. With a loose pad on a flat surface, pour 6 oz of stain into the center, spirally out from center. quickly place carpet side of the pad on floor and set buffer on top and start buffing immediately. Note: For use on the Spin Coater, order part number B10 (pad with center hole)..

$5.60

Item # B09

LED Light Kit, Buffer US

This light is intended to bolt to the top cover of buffers. 20 watt draw gives 120 watt equivalent 1600 lumens Bracket comes with hardware to mount to the three existing screws on the top of the buffer motor or hardware and spacer to drill one 1/4 inch hole on the buffer motor top shroud and mount it with the included knob and spacer. Note: This light does not run on 240 volt power, for 240 volt buffers use B27 instead. Includes: LED Light, 3-way power splitter, spacer block & mounting hardware. In order to use on the ZBUS Buffers, you must change the plugs on the buffer motor (6266 & 6269)..

$89.51

Item # B26

Skirt Kit, 16-17in w/ Vac Assy^

Convert your 16-17 inch buffer to a DCS Buffer. Full kit with everything you need. Heavy Duty skirt Sewn to brush material. Kit includes: Skirt (B25), fitting to connect to buffer (B22), hose (VH01) and mount to clamp on handle (B21). Skirt clamps around housing of buffer with a worm drive clamp...

$167.14

Item # B25A

Handle Set with Switch

Replacement handle set for the Sander 16 and OBS-18 buffers. Does not include power cord or handle tube.

$401.15

Item # BS03

Handle Tube

$119.83

Item # BS38

Screw, pan, 6-32 x 1-1/8

$1.00

Item # XABBZ

Bearing, Ball, 6002-2RS

Sealed ball bearing. Commonly found on sanders, buffers and edgers. If you are not sure what bearing you need, see the parts diagram for your machine.

$7.00

Item # 6002

Bearing, Ball, 6202-2RSH C3

Sealed ball bearing. Commonly found on sanders, buffers and edgers. If you are not sure what bearing you need, see the parts diagram for your machine.

$7.00

Item # 6202

Arm Link LH Snd 16

$27.50

Item # BS68

Arm Link RH Snd 16

Right arm support for handle tube on Clarke Sander 16

$39.00

Item # BS67

Cam Lever Assy w/grip

$19.36

Item # BA55

Capacitor, Run, 20mfd

$27.00

Item # AS73

Capacitor, Start 340-408mfd

$17.04

Item # B03

Clamp, Handle Tube

$46.74

Item # BS16

Cord Hook

$14.63

Item # OB39

Coupling OEM Rubber Buffer

Original rubber type buffer coupling for buffers. Used between the motor armature and gearbox. Upgrade to the #B01 for a more heavy duty coupling for hard plating or use with the UFO.

$25.00

Item # B02

Gear Box 11:1

11:1 floor buffer gear box. Used to reduce buffer to 156RPM from normal 175RPM buffers.

$1,200.00

Item # BM13

Handle Grip

$5.89

Item # BS02

Handle Tee

$78.47

Item # BS01

Lever, Switch Sander 16

Aluminum on off lever for Sander 16 left or right

$19.03

Item # BS11

Load Spring, 35mm (6202) Tab

Tab load spring. For 6202 bearing.

$3.00

Item # SPR1128

Nut, jam nylock, 3/8-16

$1.00

Item # XEEH

Nut, nylock, 3/8-16

$1.00

Item # XEBH

Nut, nylock, 5/16-18

$1.00

Item # XEBG

Pin, dowel, 3/16 x 1

$1.00

Item # XIBDG

Pivot, Handle

$42.75

Item # BS26

Rivet, 5/32 x 3/8

$1.00

Item # DJF27

Screw, flat, 1/4-20 x 0.75

$1.00

Item # XACFF

Screw, hex, 1/4-20 x 1

$1.00

Item # XAAFG

Screw, hex, 5/16-18 x 1

$1.00

Item # XAAGG

Screw, hex, 5/16-18 x 2

$1.00

Item # XAAGK

Screw, pan, 10-24 x 0.375

$1.00

Item # XABDC

Screw, pan, 10-24 x 1

$1.00

Item # XABDG

Screw, pan, 8-32 x 0.25

$1.00

Item # XABCA

Screw, shoulder, 3/8 x 0.625

$5.00

Item # XALHE

Screw, socket, 10-32 x 1

$1.00

Item # XAQDG

Skirt Snd 1600 metal (OEM)~

$120.64

Item # BA35

Spacer

$26.62

Item # B06

Start Switch, OEM

$55.00

Item # BM15

Strain Relief

$12.30

Item # BS40

Switch Assembly

Replacement switch assembly for Sander 16 and older OBS-18 buffers. Will not fit Sander 1600 or FM buffers! Comes as a complete assembly replacing the BS06, BS09 and BS18 safety interlock components. Does not include BS11 switch levers. This is a single pole switch. Connect the black wires to the switch, and use the included connector to connect both white wires together.

$100.00

Item # BS05