Clarke RS16

Complete parts breakdown for Clarke RS16

More buffer upgrades abailable here!

This Parts breakdown is for the following machines:

RS 16 Buffer

RS 16 DC Buffer

Related Products

Stain Carpet Pad 16 in.

16 in. Carpet Pad for use with your Floor Sanding Buffer. All pads are vacuumed and heat singed on the edge. If you are driving this carpet with a maintenance pad and it slips out you may want to use a spray glue to stick the two together. The spray glue can easily be peeled apart when finished. With a loose pad on a flat surface, pour 6 oz of stain into the center, spirally out from center. quickly place carpet side of the pad on floor and set buffer on top and start buffing immediately. Note: For use on the Spin Coater, order part number B10 (pad with center hole)..

$5.60

Item # B09

LED Light Kit, Buffer US

This light is intended to bolt to the top cover of buffers. 20 watt draw gives 120 watt equivalent 1600 lumens Bracket comes with hardware to mount to the three existing screws on the top of the buffer motor or hardware and spacer to drill one 1/4 inch hole on the buffer motor top shroud and mount it with the included knob and spacer. Note: This light does not run on 240 volt power, for 240 volt buffers use B27 instead. Includes: LED Light, 3-way power splitter, spacer block & mounting hardware. In order to use on the ZBUS Buffers, you must change the plugs on the buffer motor (6266 & 6269)..

$89.51

Item # B26

Skirt Kit, 16-17in w/ Vac Assy^

Convert your 16-17 inch buffer to a DCS Buffer. Full kit with everything you need. Heavy Duty skirt Sewn to brush material. Kit includes: Skirt (B25), fitting to connect to buffer (B22), hose (VH01) and mount to clamp on handle (B21). Skirt clamps around housing of buffer with a worm drive clamp...

$167.14

Item # B25A

Switch Lever Only

$10.00

Item # BR04

Hose, 1.5 x 3 w/Ends^

3 Foot long 1-1/2 inch diameter crushproof vacuum hose with fixed cuffs.

$22.19

Item # VH01

Adapter, Handle Hose

1-1/2 pipe with a clamp to fit on buffer handles. Helps hold the hose of the floor on DCS type buffers.

$16.64

Item # B21

Arm Link, Left

$14.96

Item # BR20

Arm Link, Right

$14.52

Item # BR18

Baffle, Dust Collection*

$92.26

Item # BR36

Bumper 16 inch

$35.14

Item # BR34

Cam Lever Assy w/grip

$19.36

Item # BA55

Capacitor, Run 50mfd*

Run capacitor used primarily on Galaxy Floor Sanders (2000, Omega, BD12, B12). Also used on American Sanders RS16 & RS16DC buffers and Nilfisk 17SD Buffers.

$25.00

Item # GAL032

Capacitor, Run, 60mfd

$68.16

Item # EZ68

Capacitor, Start, 460-552mfd

$19.09

Item # BA63

Clamp, Handle

$76.99

Item # BA19

Cover, Motor

$53.02

Item # BR30

Grip

$5.99

Item # BR14

Handle Back RS16

$119.56

Item # BR06

Handle Front RS16

$75.60

Item # BR02

Handle Tube

$50.96

Item # BR38

Main Frame

$122.67

Item # BR33

Motor

$1,058.09

Item # BR29

Nut, nylock, 3/8-16

$1.00

Item # XEBH

Pin, Handle Pivot

$7.04

Item # BR21

Screw, pan, 1/4-20 x 1

$1.00

Item # XABFG

Screw, pan, 10-32 x 0.375

$1.00

Item # XANDC

Screw, pan, 10-32 x 0.75

$1.00

Item # XANDF

Shield, non-DC

$245.00

Item # BR37

Shield, Outer for DC*

$101.78

Item # BR35

Start Switch

This start switch is found under the top motor cover on RS16 buffers. This controls the start capacitor, disconnecting once the motor is running. When they fail, the motor will struggle to start and trip breakers. This can be replaced with the BN70 electronic start switch.

$41.58

Item # BR66