US Sander

Spacer

..

$7.51

Item # AP39

Spacer

..

$8.00

Item # CS127

Spacer

..

$8.00

Item # CL54

Spacer

..

$6.75

Item # CL66

Spacer for CK04, Short~

..

$12.50

Item # CK03

Spacer for Feather Handle Kit

..

$5.00

Item # AS171B

Spacer* (Fits 1/4 Pin)

..

$5.00

Item # CL136

Spacer, Caster Axle

..

$6.00

Item # TS95

Spacer, Castor Pivot

Shim washer for above the rear wheel yoke. 4 shims standard. Adding more shims will make the machine cut more aggressively...

$5.40

Item # HS386

Spacer, Fan Collar F89/504

..

$9.84

Item # CS73

Spacer, Long~

..

$12.50

Item # CK02

Spacer, Outer~

..

$19.54

Item # GL04

Spacer, Wheel Bearing*

..

$6.75

Item # AS83

Spacer, Wheel*

..

$4.55

Item # AS54

Spade Screw

..

$3.50

Item # CS118

Spanner Nut

..

$14.50

Item # UF92

Spanner Wrench

Spanner wrench for UFO clutch. You will need this to adjust the UF92 Spanner Nut when working on a UFO clutch...

$20.18

Item # UF100

Spanner Wrench for DSE5 & oldDRE

Wrench for the spanner nuts used on our Stair Edger(DSE5) and many of the older floor sanding radiator/toe kick edgers with Porter Cable Motors (IOB) and DRE13/DRE10 (Makita)...

$8.00

Item # DREM07

Spin Coat Drive Hub Assembly

..

$228.64

Item # SCA01

Splitter Box 25 Plast No 110

This box makes it easier to supply power to a sander and a dust collection system, or two sanders. The unit consists of a 25 foot 8 gage main cable, a 40 amp breaker in a water resistant box, and two 6 foot output leads with 30 amp plugs. Connect the 8 gage cable to a 60 amp breaker and run 2 machines off the outputs. The breaker is wired to trip both outputs in case of an overload. Note: This is not a power booster...

$419.27

Item # DSBOXSM

Spring Mount 4/set (10666A)

..

$33.43

Item # OB11

Spring Washer

..

$5.62

Item # UF90

Spring, Pressure

..

$26.60

Item # CL24

Spring, Top Roller*

..

$28.80

Item # CL30

Stain Carpet Pad 16 in.

16 in. Carpet Pad for use with your Floor Sanding Buffer. All pads are vacuumed and heat singed on the edge. If you are driving this carpet with a maintenance pad and it slips out you may want to use a spray glue to stick the two together. The spray glue can easily be peeled apart when finished. With a loose pad on a flat surface, pour 6 oz of stain into the center, spirally out from center. quickly place carpet side of the pad on floor and set buffer on top and start buffing immediately. Note: For use on the Spin Coater, order part number B10 (pad with center hole)..

$5.60

Item # B09

Stain Carpet Pad W/ Hole 16 in.

16 in. Carpet Pad with 3.5 inch center hole for use with the SCA16 Spin Coater attachment. Patent Pending...

$7.17

Item # B10

Stair Edger kit,no motor no case

This is a kit with everything except the motor for a stair edger. If you live in a country with only 220 volt power, you will need to purchase a Makita GV7000C in your country, and install it on this kit (Makita does not sell 220 volt motors in the US)...

$418.00

Item # DSE5K

Start Capacitor

..

$24.00

Item # BU63

Start Switch

Start switch inside motor of ZBUS and ZBUSHD..

$20.00

Item # BU66

Start Switch Buffer

Mechanical start stitch used on the buffer motor to engage the start capacitor. If the capacitors are good and the buffer will not start this is the next thing to replace...

$27.00

Item # B05