Cable, 12/3 SJOOW 300v*

Cut to length cable. May be White or Yellow. 12 gage, 3 wire SJOOW 300 volt jacket for edgers and buffers. Maximum continuous length is 250 ft...

$2.20

Item # 12-3

Cable 10/3 Gray 600v*

This is the high quality gray flexible cable specially for your big sander. 10/3 wire with 600 volt rating. Flexible, yet heavy duty insulation to resist scuffs and sanders. Sold by the foot or available on 500ft spools. Extension power cord cable for 220v Floor Sanders Maximum continuous length for ground shipping is 150ft. Lengths longer than 150 foot (up to 500ft spools) must ship truck freight - please contact us for a shipping quote...

$3.74

Item # 10-3H

Cable, 10/4 Yellow 600v~

3 phase cable for ryder system. 10 gage 4 wire non-marking yellow SOOW cable. Sold by the foot...

$2.90

Item # 10-4

Edger Pad Adjust Removal Tool

For removing and installing edger pads. This adjustable wrench can be adjusted to fit all edger pads...

$46.70

Item # E20A

Commutator Stone, 1/4 x 1/2

Brush seater/commutator stone. To seat new brushes, run this stone over the surface of the commutator with the motor running. The abrasive from the stone will stick to the commutator, wearing down the brushes to match the shape of the commutator. Clean the commutator with compressed air to remove the abrasive when done...

$11.44

Item # SW05

..

$0.00

Item # D

1-1/2 thin connector nut

Replacement nut for B22 fitting. Thin nut for low profile use under the buffer frame...

$3.00

Item # B23

1/2-13 x 2 Low Socket

..

$6.00

Item # XAYJK

1/2-13 x 2.5 Low Socket

..

$12.00

Item # XAYJM

1/4 large OD washer

..

$1.00

Item # DJ134A

1/4 lock washers

..

$1.00

Item # DJF05

1/4 Locknut Sm Gears 4 req

..

$1.00

Item # UF31

1/4 x 1-1/4 pan head, SS

..

$1.00

Item # DJF12

1/4 x 1/2 truss head, SS

..

$1.00

Item # DJF09

1/4 x 3/4 hex head, zink pltd.

..

$1.00

Item # DJF04

1/4 x 3/4 pan head, SS

..

$1.00

Item # DJF11

1/4 x 3/4 truss head, SS

..

$1.00

Item # DJF10

1/4 x 3/4 type F thr. cut, SS pa

..

$1.00

Item # DSF17

1/4 x 3/8 truss head, SS

..

$1.00

Item # DJF17

1/4 x 4.5 hex head

..

$1.00

Item # DJF03

10 Belt Guard SS w/Vacuum

..

$21.88

Item # DRE40-10

10-32 x 1 pan head, SS

..

$1.00

Item # DJF18

115v Bulb 25W

Standard heavy duty bulb for 110v Clarke type edgers. 25 watt See our part number E13L for our replacement LED bulb that will not not burn out and is a direct replacement without any modifications. We also have part number E26 that is a brighter pod LED light upgrade kit...

$1.83

Item # E13

12x18 Face grip

Replacement grip face for OBS18 and OBS18DC. Has adhesive face to adhere to machine...

$82.00

Item # OB35

13 SS Belt Guard w/ Vacuum

..

$15.53

Item # DRE40-13

15 Red/White Stopper^

This is a specially designed pad for driving screens. The thick red pad provides cushioning, while the thin white pad grips the screen. The white pad is made from a tightly woven material which grips the screen better than a standard pad...

$15.00

Item # SUDRW15

15 x 2 Felt

..

$48.89

Item # SDA15F

15 x 2 Rubber

..

$44.00

Item # SDA15R

16 inch Sand Plate Aluinum

16 Hard plate for sanding with a buffer. This has a 1/2 thick felt face. For use with 16 x 2 hole paper. For best results, use 2 pieces of paper placed back to back. This will allow the abrasive on one piece to grip the face of the SDA...

$363.92

Item # SDA16

16 Red/White Stopper^* 5

16 Screen driver. This pad is specially designed for driving screens. The thick red pad provides cushioning, while the thin white pad grips the screen. The white pad is made from a tightly woven material which grips the screen better than a standard pad...

$13.00

Item # SUDRW16