4L Series belt. Commonly used as fan belts on older sanders. 1/2" wide x 5/16" thick...
$8.00
Item # 4L470
To connect 2 smaller hoses to a 4 hose. The smaller hoses can be 2 or 2.5. The 2 hose cuff fits inside the Y, the 2.5 cuff fits outside. Made from black plastic...
$58.00
Item # DJY
To connect 4 smaller hoses to a 4 inch hose or cyclone. The smaller hoses can be 2 or 2.5 inch. The 2 inch hose cuff fits inside the Y, the 2.5 inch cuff fits outside. Made from steel...
$134.00
Item # DJYS
..
$65.00
Item # DJYR
50 Foot long 1-1/2 inch diameter crushproof vacuum hose. Cuffs sold seperately. see part #VH07 (1.5 Hose Cuff) or #VH08 (1.5 Swivel Hose Cuff)..
$138.36
Item # VH05
5 Diameter by 50 foot super flexible vacuum hose with ends. Has a 3 metal fitting on one end, and a mating female metal fitting on the other, plus a 6& to 5& reducer. This hose has an internal wire for support...
$488.00
Item # DSH5
These 3-pole rotary on-off switches are used for some 3-phase sanders. This is 30 amp with screw terminals...
$178.00
Item # K861
Sander power cord made with 10/3 non marking gray or yellow cord. 50 Foot long, with 20 amp twist lock plugs (Nema L620). Do not run more than 100 ft. without a power booster...
$229.38
Item # SC5020
Sander power cord made with 10/3 non marking gray or yellow cord. 50 Foot long, with 30 amp twist lock plugs (Nema L620). Do not run more than 100 ft. without a power booster...
$251.00
Item # SC5030
$473.00
Item # DSH51
To replace the flanged inlet found on many of the older drum sanders. This pigtail has a plate with the same mounting holes as the old inlet, and a 7101N (2-prong) plug...
$37.10
Item # 7102NM
5" Diameter by 50 foot super flexible vacuum hose with ends. Has a 3" metal fitting on one end, and a mating female metal fitting on the other. This hose has an internal wire for support...
$243.00
Item # DSH52
5 Diameter by 50 foot super flexible vacuum hose without ends. This hose has an internal wire for support. We no longer carry this hose - buy from Zoro..
$420.00
Item # DSH5A
5L Series belt. These are commonly found on older drum sanders. 21/32" wide x 3/8" thick...
$9.00
Item # 5L340
Item # 5L350
Item # 5L360
Item # 5L370
5L Series belt. These are commonly found on older drum sanders. 21/32 wide x 3/8 thick...
Item # 5L380
Item # 5L390
Item # 5L400
We no longer carry this hose - buy from Zoro..
$214.00
Item # DSH5A25
Item # 5L410
Item # 5L420
Item # 5L430
Replacement clamp for 5" vacuum hose...
$3.00
Item # DSH5B
Item # DSH5D
$16.00
Item # DSH5C
Item # DSH5E
Sealed ball bearing. Commonly found on sanders, buffers and edgers. If you are not sure what bearing you need, see the parts diagram for your machine...
$7.00
Item # 6000
6" Diameter by 50 foot super flexible vacuum hose with ends. Has a 3" metal fitting on one end, and a mating female metal fitting on the other. This hose has an internal wire for support...
$679.00
Item # DSH6
