This Parts breakdown is for the following machines:
Sealed ball bearing. Commonly found on sanders, buffers and edgers. If you are not sure what bearing you need, see the parts diagram for your machine.
$7.00
Item # 6202
$9.00
Item # 6204
These blade style switches have a high current rating for starting and stopping motors. This 30 amp switch fits most of the older drum sanders, including the F89, 504 and Silverline Pro 8.
$122.72
Item # K309
This is the 3-position, snap action switch used for the 110-220 selector switch on many of the older drum sanders.
$208.44
Item # K280
$32.00
Item # CS31
Item # CS40
W200 Series bearings are similar to a 6200 series bearing, only wider. They may have rubber seals or steel shields. Most commonly used on some of the older Clarke & Portercable drum sander motors.
$47.72
Item # W204PP
$22.00
Item # CS29
$24.54
Item # GAL120
Carbons measure 1/4 x 7/8, 1-1/4 inch long. These have a wire connecting 2 brushes to make a pair; contains 2 pairs (for brushes total). Fits the Master motor on some of the older Clarke and Porter Cable drum sanders.
$21.28
Item # CS46
Motor Brush set. Includes 4 carbon brushes with two connected by a wire. Fits most Peerless Sander motors 1.5, 2, and 3 HP ie American Standard 8, Clarke American Super 8, Clarke 504 etc see diagram listing below for some of the sanders these are used on. Carbons measure 1/4 x 5/8, 1-1/4 inch long. These have a wire connecting 2 brushes to make a pair; contains 2 pairs (4 brushes total). Fits the Peerless motor on most of the older drum sanders.
$17.75
Item # S25
Carbons measure 1/4 x 1/2, 1-1/4 inch long. These have a wire connecting 2 brushes to make a pair; contains 2 pairs (for brushes total). Fits the motor on some of the older Clarke and Porter Cable drum sanders.
$30.56
Item # CS42
$60.91
Item # CS144
$62.57
Item # GAL069
For carrying Clarke (not American) sanders up and down stairs. Fit Clarke & Porter cable 12, Clarke 504 & F89, Portercable F87 & F89, and Galaxy 506 drum sanders.
$67.51
Item # CS12
Item # CS63
$20.90
Item # AS34
$5.70
Item # GAL125
Item # GAL124
$24.95
Item # CS71
$29.00
Item # CS08
$19.95
Item # CS83
$275.00
Item # CS48-6
$179.90
Item # CS16
$110.00
Item # CS26
$50.00
Item # CS91
$308.88
Item # CS92
Item # CS44
$125.00
Item # CS94
Item # CS24
$39.95
Item # CS45
$1.50
Item # CS09
Item # CS80
Item # CS54
$78.74
Item # GAL092
$45.00
Item # CS21
$55.17
Item # CS22
$28.00
Item # CS49
$12.95
Item # CS138
$27.00
Item # CS06
$19.43
Item # CS03
$2.50
Item # CS47
To replace the inlet found on many of the older drum sanders. This pigtail has a plate that uses the same mounting holes as the old inlet, and a 6212 (20 amp twist-lock) plug.
$28.93
Item # CS142
$130.00
Item # CS93
Rear wheel yoke pivot shaft for Galaxy, Clarke 504, Clarke F89, and Porter Cable F87. When the rear caster does not swivel smoothly there is a good chance that this shaft is bent.
$35.00
Item # CS37
$52.26
Item # GAL087
$250.00
Item # CS51
Rear wheel made from a red urethane bonded to a metal core. Comes with bearings, spacers & axle. 3-1/2 diameter, fits Clarke or Porter Cable 12, 504, and F89 drum sanders. (Side wheel is part #CS01)
$107.92
Item # CS56
We recover your Old CLARKE (not Clarke American) F89 by vulcanizing red rubber,grinding to size and electronically balancing. Drum bushings must be in good condition to do balancing and precision grinding. We do drum bushings as an extra service.
$310.00
Item # RCSF89
$8.53
Item # AS86
$60.21
Item # GAL068
$8.95
Item # CS10
$1.00
Item # XAEDE
$7.50
Item # CS118A
$8.59
Item # GAL110
$10.60
Item # CS38
$10.95
Item # CS28
$12.00
Item # CS57
$22.50
Item # CS17
$8.50
Item # CS77
Side wheels made from a red urethane bonded to a metal core. Wheels come with bearings installed. 4 diameter, fit Clarke or Porter Cable 12, 504, and F89 drum sanders. (Back wheel is part #CS56)
$57.00
Item # CS01
$8.00
Item # CS127
Item # CS73
$12.96
Item # CS43
$35.05
Item # GAL134
Replaces the old rotary switch on Clarke & Portercable drum sanders. Includes a 30 amp circuit breaker switch (K840), adapter housing, and mounting hardware.
$121.38
Item # CS50
Paper templates make it easier to cut the paper to fit your machine. Use the angle cut on the end of the template to get a perfect bend. These have a fixed length, so you may need to cut the paper a little longer or shorter to fit your machine. Fits Clarke & Porter Cable F89.
$21.25
Item # CS124
$55.38
Item # CS34
$70.90
Item # CS02
$100.13
Item # CS95
The following documents are also available for this machine:
Here are a few tips on using them.