This Parts breakdown is for the following machines:
16 in. Carpet Pad for use with your Floor Sanding Buffer. All pads are vacuumed and heat singed on the edge. If you are driving this carpet with a maintenance pad and it slips out you may want to use a spray glue to stick the two together. The spray glue can easily be peeled apart when finished. With a loose pad on a flat surface, pour 6 oz of stain into the center, spirally out from center. quickly place carpet side of the pad on floor and set buffer on top and start buffing immediately. Note: For use on the Spin Coater, order part number B10 (pad with center hole)..
$5.60
Item # B09
This light is intended to bolt to the top cover of buffers. 20 watt draw gives 120 watt equivalent 1600 lumens Bracket comes with hardware to mount to the three existing screws on the top of the buffer motor or hardware and spacer to drill one 1/4 inch hole on the buffer motor top shroud and mount it with the included knob and spacer. Note: This light does not run on 240 volt power, for 240 volt buffers use B27 instead. Includes: LED Light, 3-way power splitter, spacer block & mounting hardware. In order to use on the ZBUS Buffers, you must change the plugs on the buffer motor (6266 & 6269)..
$75.00
Item # B26
Convert your 16-17 inch buffer to a DCS Buffer. Full kit with everything you need. Heavy Duty skirt Sewn to brush material. Kit includes: Skirt (B25), fitting to connect to buffer (B22), hose (VH01) and mount to clamp on handle (B21). Skirt clamps around housing of buffer with a worm drive clamp...
$163.51
Item # B25A
Electronic start switch used on EZ8 sanders and some buffers. This switch controls the start capacitors.
$110.00
Item # EZ70
Replacement Buffer Dust Skirt. Heavy Duty skirt Sewn to brush material. Buffer dust skirt for 15-17 inch buffers. Clamps around housing of buffer with a worm drive clamp. Includes clamp.
$111.90
Item # B25
3 Foot long 1-1/2 inch diameter crushproof vacuum hose with fixed cuffs.
$13.91
Item # VH01
1-1/2 pipe with a clamp to fit on buffer handles. Helps hold the hose of the floor on DCS type buffers.
$15.46
Item # B21
$38.39
Item # BA20
Item # BA18
$38.94
Item # BA34
$106.04
Item # BA44
$8.03
Item # BA26
$25.20
Item # BA05
$13.46
Item # BA55
$31.77
Item # BA58
$178.20
Item # BA64
$22.00
Item # BA56
$15.96
Item # BA63
$47.41
Item # OB06
$65.10
Item # BA19
$54.25
Item # BA102
$83.68
Item # BA57
11:1 floor buffer gear box. Used to reduce buffer to 156RPM from normal 175RPM buffers.
$215.93
Item # BM13
$58.08
Item # BF09
$115.61
Item # BF02
Item # BF01
$12.54
Item # BF12
$13.09
Item # BF11
$141.02
Item # BA38
$43.55
Item # BA02
$30.78
Item # BA09
$13.00
Item # BA07
Item # BA88
$16.83
Item # BF03
$7.35
Item # BA03
$141.90
Item # BA85
$22.05
Item # BA87
$59.29
Item # BA82
$48.50
Item # BA81
$52.41
Item # BA86
$20.19
Item # BA83
$7.04
Item # BA84
$330.83
Item # BA33
$1,469.71
Item # BA29
$1.00
Item # XEDF
$2.00
Item # XEKD
Item # XEBH
Item # XIAFG
Item # XACFF
Item # XAAHV
Item # XAAGK
Item # XAAGM
Item # XABFF
Item # XANDD
Item # XANDF
Item # XABBJ
Item # XABCD
Item # XAEDD
Item # XAEDG
$9.90
Item # BA43
$191.69
Item # BA50
$146.21
Item # BA49
$186.99
Item # BA77
Item # BA76
$120.64
Item # BA35
$6.71
Item # BF04
$6.50
Item # BA08
Item # BF08
$5.80
Item # BA04
$8.97
Item # BA40
Switch measures 1.75 x 1.25 x 5/8 with plunger almost in middle between mounting holes which are 1 inch apart. Used on Clarke
$20.90
Item # BS05
$16.44
Item # BA06
$9.30
Item # BF10
$7.70
Item # BF05
Item # BF07
$1.25
Item # AP21
$6.99
Item # BA22
Item # XOCD
Item # XODG
Item # XOBF
Item # XOBH
$44.83
Item # BA24
Here are a few tips on using them.