This Parts breakdown is for the following machines:
16 in. Carpet Pad for use with your Floor Sanding Buffer. All pads are vacuumed and heat singed on the edge. If you are driving this carpet with a maintenance pad and it slips out you may want to use a spray glue to stick the two together. The spray glue can easily be peeled apart when finished. With a loose pad on a flat surface, pour 6 oz of stain into the center, spirally out from center. quickly place carpet side of the pad on floor and set buffer on top and start buffing immediately. Note: For use on the Spin Coater, order part number B10 (pad with center hole)..
$5.60
Item # B09
This light is intended to bolt to the top cover of buffers. 20 watt draw gives 120 watt equivalent 1600 lumens Bracket comes with hardware to mount to the three existing screws on the top of the buffer motor or hardware and spacer to drill one 1/4 inch hole on the buffer motor top shroud and mount it with the included knob and spacer. Note: This light does not run on 240 volt power, for 240 volt buffers use B27 instead. Includes: LED Light, 3-way power splitter, spacer block & mounting hardware. In order to use on the ZBUS Buffers, you must change the plugs on the buffer motor (6266 & 6269)..
$75.00
Item # B26
Convert your 16-17 inch buffer to a DCS Buffer. Full kit with everything you need. Heavy Duty skirt Sewn to brush material. Kit includes: Skirt (B25), fitting to connect to buffer (B22), hose (VH01) and mount to clamp on handle (B21). Skirt clamps around housing of buffer with a worm drive clamp...
$163.51
Item # B25A
NEMA 5-15 15 amp 125 volt 3-prong grounding female connector. This is the standard household plug. Eaton Cooper Arrow Hart Brand
$15.68
Item # 6269
$74.06
Item # BM14
$21.50
Item # BM36
$35.27
Item # BM39
$22.70
Item # BM07
$1.00
Item # BM40
$27.00
Item # AS73
$14.37
Item # B03
$45.50
Item # BM11
$156.47
Item # BM06
$5.50
Item # BM37
$22.75
Item # BM56
$3.04
Item # BM33
11:1 floor buffer gear box. Used to reduce buffer to 156RPM from normal 175RPM buffers.
$215.93
Item # BM13
$21.90
Item # BM23
$567.33
Item # BM04
$26.28
Item # BM35
$9.56
Item # BM18
$11.95
Item # BM49
This contains all the parts required to replace the old cast handle T (now obsolete). Comes with installation instructions.
$125.41
Item # BM01
$71.67
Item # BM31
$34.64
Item # BM03
$1,326.96
Item # BM02
$8.00
Item # BM22
$31.06
Item # BM16
Item # XEFE
Item # XEBG
Item # XEIH
Item # XIBFH
Item # XIABD
Item # XMADF
$268.46
Item # BM19
Item # XACED
Item # XACEI
Item # XAAFF
Item # XAAGI
Item # XANDD
Item # XABBA
Item # XABBG
Item # XABCC
Item # XAHGC
$37.03
Item # BM24
$5.98
Item # BM05LS
$55.00
Item # BM15
Replacement inserts also available - see CE56 and AE62.
$22.00
Item # CE55
$40.95
Item # BM54
$43.00
Item # BM34
$10.00
Item # BM05
Item # XOAB
Item # XODF
Item # BM09
Item # XOEB
Item # XOBH
$2.00
Item # XOFH
$16.73
Item # BM17
Here are a few tips on using them.