Pigtail, OEM

Short cord that goes through handle in super 7 edger. Strain relief sold separately (CE55)

$37.13

Item # CE88

7 x 7/8 Cutter

Cut your own edger discs from roll paper. Use with a wood mallet (DC06). 7 diameter with a 7/8 center hole.

$79.00

Item # DC03

7 x 5/16 Cutter

Cut your own edger discs from roll paper. Use with a wood mallet (DC06). 7 diameter with a 5/16 center hole.

$77.00

Item # DC13

housing ring, 1.375

$1.00

Item # XMCR

Edger Cord 35^

35 Foot power cord. Has a standard male 3-prong plug on one end and a female twist lock connector at the other. Made from 12/3 cable, these cords can be used on edgers, buffers and 110 volt sanders.

$137.88

Item # EC35

Pigtail w/Plug, Edge^

16" Long pigtail with male twist lock plug. Fits Super 7, B-2 & Silverline edgers. May also fit some others.

$27.13

Item # EC03

Edger Cord Assy 1 Super 7^

$53.13

Item # EC02

Super Edger Pad S7 B2

Edger Pad for Floor Sanding Edgers. Fits Clarke Super 7 & B-2, Galaxy Elite and SilverLine edgers. This super pad is made from billet aluminum with an OEM style rubber face. We designed these pads because we were tired of hearing complaints about bent edger pads. We have been making them since 2006, and have only seen 1 that got bent. Billet Aluminum More rubber to dress than original pads. Precision ground and balanced. Made in USA.

$85.30

Item # USE01

Plug, M, 125v 15a twist-lock*

NEMA L5-15 15 amp 125 volt grounding twist-lock male plug. This is the size used on most edgers. Eaton Cooper Arrow Hart Brand

$15.83

Item # 4721

Bearing, Ball, 6202-2RS

Sealed ball bearing. Commonly found on sanders, buffers and edgers. If you are not sure what bearing you need, see the parts diagram for your machine.

$7.00

Item # 6202

Bearing, Ball, 6203-2RS

Sealed ball bearing. Commonly found on sanders, buffers and edgers. If you are not sure what bearing you need, see the parts diagram for your machine.

$7.00

Item # 6203

Switch, Med duty 20 Amp

On-Off toggle switches for Floor Sanding edgers. These are a 2-pole switch. Medium duty 20 amp @110v This is the edger switch we recommend for most Clarke Edgers S7 (Super 7R) & B2

$13.76

Item # K508A

115v Bulb 25W

Standard heavy duty bulb for 110v Clarke type edgers. 25 watt See our part number E13L for our replacement LED bulb that will not not burn out and is a direct replacement without any modifications. We also have part number E26 that is a brighter pod LED light upgrade kit.

$1.75

Item # E13

Adj. Screw

$17.71

Item # CE20

Adj. Screw Loc Nut

$8.97

Item # CE21

Armature 115v

Replacement armature for Clarke American Sanders Super 7 edger. Includes both fans.

$489.46

Item # CE42

Armature 240v~

$992.86

Item # CE64

Baffle Plate

$7.37

Item # CE43

Bag Support Bushing, w/screw

$14.72

Item # CE52

Bearing, Sealed*

The caster pivot bearings on Super 7 edgers. These have a teflon seal to keep dust out. Also fits the edger wheel.

$5.45

Item # CE67

Belt Clip & Ring Assy

Use this clip to attach the edger power cord to your belt. This will keep the cord out of the way when edging.

$6.24

Item # AE60

Brush Block Assy,Old Style^

$248.49

Item # CE38

Brush Holder (DU49)*

$38.53

Item # CE32

Brush Holder Asy New No Spring

Clarke Super 7 Edger New style brush holder assembly This is the brush holder assembly that has been used since the late 90s. It also can be used as a replacement for the older style four brush holder on the super 7. You will just need to put push connect ends on the wires. This does not include springs (needed 4pcs - CE68) and also requires the brushes with the wires attached (#CE57)

$53.48

Item # CE38N

Brush Ring only*

$22.00

Item # CE53

Brush Spring New Style S7

New style brush spring for Clarke Super 7 Edger Fits CE38N brush block with CE57 brush set Do not completely unroll the spring or it will be ruined.

$6.58

Item # CE68

Brush Spring old style*

$12.86

Item # CE31

Brushes OS no wire, set of 4

Replacement brushes for Super 7 edgers. Set of 4 brushes without wires (for brushes with wires, see part #CE57). We recommend replacing brushes when they are worn down to 2/3 the normal length. Running brushes shorter than this can cause the armature to wear faster. Carbons measure 3/16 x 15/16, 7/8 long.

$18.12

Item # CE09

Brushes w/wire, 4per set Super7*

Replacement brush set for Clarke Super 7 / 7R edgers. Set of 4 brushes with wires (for brushes without wires, see part #CE09). We recommend replacing brushes when they are worn down to 2/3 the normal length. Running brushes shorter than this can cause the armature to wear faster. Carbons measure 3/16 x 15/16, 7/8 long. Made in USA by the original Clarke manufacturer. Replaces OEM part number 40818A

$16.48

Item # CE57

Brushes, set of 2

Set of 2 replacement brushes for Super 7 2-brush edgers. Note that most Super 7 edgers are 4-brush, make sure that you confirm which you need before ordering. We recommend replacing brushes when they are worn down to 2/3 the normal length. Running brushes shorter than this can cause the armature to wear faster. Carbons measure 5/16 x 5/8, 1 inch long.

$21.24

Item # CE04

Caster Bearing Spacer S7

Clarke Super 7 bearing spacer used between pivot bearings S7

$2.17

Item # CE19

Caster Bracket

Caster bracket for Super 7 edger We also have our caster upgrade kit available. See part CE99

$97.02

Item # CE07

Caster, Teflon^

Original factory design type wheel assembly with Teflon, Plastic wheel. Upgraded with a grade 5 stud and a lock nut to stop the assembly from loosening up and falling off. Softer than steel to reduce wheel marks Longer lasting than rubber or urethane. Easy clean plastic material. Non-marking plastic Teflon material. See our EZ Roll Wheel Kit CE99 for larger rubber wheels on billet polished brackets for soft floors or everyday use.

$29.00

Item # CE05T

Caster, Urethane OEM

Original factory wheel assembly with Urethane wheel from Clarke. Softer than steel to reduce wheel marks. Non-marking urethane material over steel core. V shaped urethane wheel. (this is kind of a pointed tire) See our EZ Roll Wheel Kit #CE99 for larger rubber wheels on billet polished brackets for soft floors or everyday use.

$52.12

Item # CE05U

Caster^

Floor Sanding Edger Caster Wheel Assembly for Clarke Super 7R Edger. Original factory design type wheel assembly with steel wheel. Upgraded with a grade 5 stud and a lock nut to stop the assembly from loosening up and falling off. We also have a wheel bracket upgrade kit to convert to larger rubber wheels. See part # CE99

$25.00

Item # CE05

Clip, Fan Ret.

$2.00

Item # CE22

Compression Nut, Vac Swivel

$24.31

Item # AE93

Cover & Handle Assy

$354.90

Item # CE54

Cover, LH

$10.50

Item # CE25

Cover, RH

$11.90

Item # CE24

Discharge Pipe, Swivel w/bag

These swivel pipes are ideal for dust collection. They can be connected to a 1.5 hose, a 2 hose or a bag. Kit includes Dust pipe, Bag and rubber reducer. Fits Super 7 edgers.

$212.67

Item # CE72N

Dust Bag Support, New Style

$33.88

Item # CE30N

Dust Skirt Velcro S7

These skirts close up the gap between the edger and the floor, improving dust pickup. This is 3 short pieces, to go between the wheels. Fits Super 7 edger. Clean aluminum with a thinner before applying the adhesive Velcro. For best results apply the night before the edger will be used to allow adhesive to bond.

$11.35

Item # CE75

Edger Bag Leather Bottom S7/B2

These have a leather bottom for improved durability. Have a draw string to tie them on. Intended for use on Super 7 edgers.

$20.40

Item # E15CL

Edger Bag New Style(S7&B2)

These new style Clarke dust bags have a rubber boot to connect to the pipe. For use only on new style swivel pipes. These have a zipper for easier emptying.

$29.54

Item # E15CN

Edger Bag, S7

Standard dust bags for edgers. These have a draw string to tie them on. Intended for use on Super 7 edgers.

$21.08

Item # E15C

Edger Bag, Vinyl Bottom S7

These have a vinyl bottom for improved durability. Have a draw string to tie them on. Intended for use on Super 7 edgers.

$33.58

Item # E15CV

Edger Lube

This is our special grease mixture. The grease used by most manufacturers is too thick to flow into the gears. This mixture is thin enough to flow, but thick enough not to leak past the seals. Please note this may be blue or red.

$10.55

Item # KEL1

Edger Pad S7R

Original Clarke Edger Pad for the Super 7 Cast Aluminum Design Be careful when dressing this pad as there is not much rubber to dress on the original pads. These pads bend easily if you drop your edger. No warranty - if you bed or break the pad, contact American Sanders. We do not provide warranty replacements. For a pad that won't bend, try our USE01 American made billet aluminum pad with more rubber to dress.

$88.20

Item # CE01

Exhaust Bracket, No Pipe

New style exhaust pipe bracket for swivel pipe for Clarke Super 7

$108.85

Item # CE90

Fan, Motor

$56.65

Item # CE26

Fan, Vacuum

$141.63

Item # CE27

Field 115v

$262.79

Item # CE39

Field Housing

$250.93

Item # CE40

Gasket, Baffle

$4.37

Item # CE34

Gasket, Dust Outlet

$4.78

Item # CE23

Gasket, Gear Cover (AE29)

$3.52

Item # CE60

Gear Case Washer

Clarke Super 7 Gear Case Washer Rubber washer to stop grease from leaking by the cover screws.

$1.10

Item # CE71

Gear Housing Assy Cover S7

Clarke Super 7 Edger gear cover If your roller guard is loose (#CE02) and a new roller guard has been installed and is still loose the gear cover is worn and needs replaced.

$245.30

Item # CE48

Gear Housing~

$528.88

Item # CE46

Gear, Large

$240.38

Item # CE47

Gear, Small S7

Clarke Super 7 Edger Small Gear This gear is left handed thread to remove from that armature and must be removed first before the armature can be taken out of the gear housing.

$42.14

Item # CE45

Grease Plug

Grease plug for Super 7 edger Make sure your air hole is clean on your plug. Special Edger grease is available see part KEL1

$5.00

Item # CE15

housing ring, 1.5

$2.00

Item # XMCS

Jackshaft w/key

Jack / Gear shaft for Clarke Super 7 Edger With Key for gear S7 7R S7R

$32.51

Item # CE16

Key, woodruf, 1/8 x 0.625

$1.00

Item # XKABE

Latch, Edger Case (each)

Replacement latch for older Super 7 & B-2 edger cases. This is a single latch, some cases have 2, some cases have 4. Will not fit new style cases with metal latches.

$13.42

Item # E05

Light Guard

Clarke Super 7 Light guard See our part number E26 for our LED pod light that has a brighter light and goes on in place of this light cover.

$65.03

Item # CE41

Light Socket

$25.41

Item # CE28

Load Spring, 35mm (6202) Tab

Tab load spring. For 6202 bearing.

$2.25

Item # SPR1128

Load Spring, 40mm (6203) Tab

Tab load spring. For 6203 bearing.

$3.04

Item # SPR1132

Nylon Bushing/Bag Suprt NewSty

$7.70

Item # CE66

Paper Screw

Replacement paper retainer bolt for Super 7 Edger. Thin head, OEM size. This bolt does not have a hole for a cotter pin – if you need the hole, order part #CE58US.

$1.75

Item # CE11

Paper Screw Assy, OEM style^

Clarke Super 7 Paper Washer and Bolt Assembled with Cotter Key OEM replacement part Includes CE58US and CE59US assembled

$15.43

Item # CE58AUS

Paper Screw, OEM Style*

Replacement paper retainer bolt for Super 7 Edger. Thin head, hardened material. This bolt has a hole for a cotter pin – if you do not need the hole, part #CE11 is more economical. Replacement for part 960140

$8.07

Item # CE58US

Paper Washer, OEM style*

Paper Washer for Clarke Super 7 edgers replacement OEM part 980132 Machined washer We also have available a cheaper washer part number E12.

$6.13

Item # CE59US

Reducer, 2 Vac Kit

$8.22

Item # CE72NR

Roller Guard Retainer (BE49)

$10.50

Item # CE49

Roller Guard S7

Roller Guard for Clarke Super 7 Edger, S7R Machined out of billet aluminum with bronze bearing. The billet material is much stronger than a casting and will not crack or chip. If your roller guard is loose and a the guard and/or the gear case cover would be worn and need replaced if a new roller guard does not completely fix the loose guard.

$104.00

Item # CE02

S7 Caster Upgrade EZ Roll Rubber

The EZ Roll kit retrofits your edger with 1-5/8 diameter grey wheels. Not only do these roll better, they provide a little wider wheel base for improved stability. The soft rubber wheels work excellent on softer woods like pine. This kit fits the Super 7 edger. Our best kit for soft floors. Highly Polished Aluminum brackets. Made in USA Easy wheel adjustment. No modifications to edger. Easily switch between factory wheels and this kit. Replacement wheel assembly part number is CE98 (2 Required per edger) CE98 Replacement Wheel Assembly AV06 Replacement Tire Only

$115.00

Item # CE99

Screw Top Housing

$2.00

Item # CE69

Screw, flat, 6-32 x 0.375

$1.00

Item # XACBC

Screw, flat, 6-32 x 0.5

$1.00

Item # XACBD

Screw, pan, 1/4-20 x 1.25

$1.00

Item # XABFH

Screw, pan, 10-24 x 0.75

$1.00

Item # XABDF

Screw, pan, 10-24 x 2.5

$1.00

Item # XABDM

Screw, pan, 8-32 x 0.5

$1.00

Item # XABCD

Screw, socket, 1/4-20 x 0.75

$1.00

Item # XAEFF

Screw, socket, 1/4-20 x 1

$1.00

Item # XAEFG

Seal, Armature*

$8.93

Item # CE18

Seal, replacement, AE77N

$12.32

Item # AE91

Spacer, Bearing

$6.65

Item # CE44

Strain Relief*

Replacement inserts also available - see CE56 and AE62.

$22.00

Item # CE55

Swivel Pipe

$100.38

Item # CE92

Vac Attachment Old Style1.25^

Adapter kit for connecting your Super 7, Essex Silver Line SL7, or KT Blizzard edger to a 1.5 inch vacuum hose. Designed for the old style (fixed) pipe. Also includes coupling to connect two 1.5 inch hoses for more length.

$19.00

Item # CE72

Vent Cap

$17.93

Item # CE29

Washer, Fiber, Edger Pad(CE50)

Fiber Washer for between the edger pad and shaft on steel pads only. Not for use with aluminum edger pads. Only use with steel pads. All aluminum with rubber pads (Clarke OEM and US Sander) are designed to be used without these washers for best results and leveling of machine.

$2.60

Item # AE56

Wrench Clip

Wrench clip for Super 7 edger

$3.00

Item # CE03

Wrench, S7

Paper wrench for Clarke Super 7R edger. For removing the paper bolt on Super 7 edgers. 9/16” hex, fits a 3/8 bolt head. Replaces OEM number 987300

$14.35

Item # CE14