This Parts breakdown is for the following machines:
7-7/8 x 29-1/2 blue zirconium sanding belts. These are our economy sanding belts. They are zirconium for durability, yet priced very affordable. Zirconia grain X weight backing S seam 10 per box Known as our blue belts..
$4.15
Item # USBB80
Call for BEST PRICE! This comes with the new light and feather handle. Designed and built by Lagler in Germany, this machine has several features its competitors lack. Its light weight and easily removable handle and motor make carrying it a breeze. The unique crowned drum eliminates most of the chatter and edge gouging problems. This is our preferred machine to sell because they always work as expected. The HUMMEL belt sanding machine is the best-known floor sanding machine in the world, with thousands of models in use across the globe. Mature, long-life technology for perfect sanding quality and enormous machine power have made it the undisputed number one system for parquet floor finishing for decades. The combination of an aggressive sanding drum, three-stage drum pressure regulation and belt tensioning device with integrated automatically regulated belt guidance guarantees quick work and optimum sanding quality. If a more aggressive machine is required we would recom..
$8,187.00
Item # ZSHS001
These travel dollys have 5 inch diameter x 2 inch wide grey non marking rubber wheels to roll smoothly even on rough terrain. They have a spring pin to attach them firmly yet allow quick removal. No machine modifications. Slides on and of in seconds, so it is not in the way while sanding. Fits 8 Hummel belt sanders. ***Green Powder Coated Frame last longs and scratches less*** Now updated to fit newer machines! Also available for the Galaxy, KT, and Bona HD..
$250.00
Item # HSDOLLY
$43.88
Item # HS806
Contactor for Super Hummel 220 volt. Does not fit 3 phase machines.
$493.67
Item # HS823
Upper control rod for the Super Hummel
$50.06
Item # HS842
$92.30
Item # HS828
$399.69
Item # HS932
$352.13
Item # HS855
Left side wheel bracket with wheel, super hummel
$115.70
Item # HS880
$403.42
Item # HS833
Sealed ball bearing. Commonly found on sanders, buffers and edgers. If you are not sure what bearing you need, see the parts diagram for your machine.
$16.00
Item # 6007
$12.00
Item # 6205
$1,100.82
Item # HS802
$1,571.28
Item # HS803
$415.62
Item # HS814
$83.72
Item # HS805
Fan belt tension pulley with bracket for Hummel
$342.55
Item # HS064
Cord holder for Hummel. Includes O-ring. Note - replacement O-ring is part # UE31
$53.84
Item # HS082
OEM Running Capacitor for the Lagler Hummel and Elf sanders. For a lower cost alternative, consider HS205A instead.
$218.02
Item # HS205
OEM 130mfd Starting Capacitor for the Lagler Hummel and Elf sanders. Some very old machines may have a 60mfd capacitor instead; see HS153-60. For a lower cost alternative, consider HS153A instead.
$285.77
Item # HS153
Assembly that holds the bottom of side drum door on the Hummel
$19.08
Item # HS051
Edge guide/cone roller for the Hummel Sander. Assembled with bearings, threaded stud, and nut. Replacement bearings for this roller is # 626 OEM roller available under part # HS108
$65.00
Item # HS21
Wall guide / edger roller for Hummel Sander The wheel only is available to replace. See part number HS042.
$130.21
Item # HS102
$21.25
Item # HS256
Motor cooling fan for Super Hummel 12 inch.
$104.31
Item # HS822
Replacement Handle for left or right on newest style Hummel bullet style handles Does not fit the old style handles from the 90s
$34.92
Item # HS078
Made out of plastic Teflon type material. New style wheel for machines made after the 2000s Replaceable bearing These wheels have a flat bottom and do not mark soft floors as easily. This is our customer requested design. for original pointed type wheel use part # HS149
$64.35
Item # HS149W
$5.54
Item # HS163
$71.85
Item # HS836
Ball knob push on style for Hummel feather handle
$18.98
Item # HS083
Drum lever or feather handle for Hummel If there is play in your handle you should replace this item or install a new bushing from US Sander # HS080A This does not include the ball knob
$88.96
Item # HS080
$1.00
Item # XFAI
Item # XFBI
$4.00
Item # XPCI
Item # XPAI
Item # XPEI
Item # XBAIS
$2.00
Item # XBYIG
Item # XBEIP
$36.88
Item # HS194
$229.98
Item # HS214
$35.98
Item # HS158
Plastic chassis bushing for the wheel axle on the Hummel Sander. If your Hummel is creating waves this is one of the items you should replace to make sure your machine is moving freely. You also need to make sure the wheel axle/arm is not worn, dirty, or galled and moves freely with the wheel truck removed. Replace the axle/arm if there are any of the mentioned problems with a new axle/arm # HS151.
$18.24
Item # HS1110
$224.53
Item # HS160
PVC cover for the rear safety guard/carry handle on the Hummel
$13.37
Item # HS038
Rear wheel with yoke for Hummel This is the new style wheel with the new style single yoke caster.
$341.01
Item # HS091
Rear Caster wheel with bearing for Hummel Fit the caster yoke that only has one yoke OEM This is the tapered plastic wheel. If you want a flat wheel for soft floors see item # HS02N
$118.55
Item # HS099NS
We recommend buying a new precision drum from Lagler. We can recover yours with black rubber Grind (football shape) and electronically balance. Allow extra time for recovery.
$405.00
Item # RHS12
Also called the rear carry handle for the Hummel
$60.16
Item # HS037
$86.07
Item # HS810
Switch for Hummel Floor Sander by Lagler.
$386.34
Item # HS202
Drum pressure tension spring for the Hummel Includes the tension adjuster bolt and nuts When you change this you will have to set the machine back up the factory drum pressure. Setting bolt back to the same height will get it close but it may still be off. Too much pressure could overheat the motor. If you are getting reduced drum pressure or are getting waves you may want to change this. If you are getting waves also purchase the HS1110 bushings.
$25.94
Item # HS140
$186.12
Item # HS271
Here are a few tips on using them.